Buying direct from Maplin saves you money. Maplin cuts amazing deals with manufacturers with the Maplin bulk-buying power and passes on big, big savings to their customers. Maplin customers know they won't find such good deals on Electrical products or such good service at such low prices anywhere else!

AOC I2757FM 27 WIDE IPS MONITOR MY PLAY, at Maplin
MHL interface (Mobile High-Definition Link)• Audio out• DCR• Eco Mode• e-Saver• i-Menu• MHL• Screen+• Kensington Security Lock• Headphone outThis Full HD monitor blows the contents of your Android devices up to an impressive size With the innovative MHLâ„¢ interface (Mobile High-Definition Link) high-resolution photos, videos and games can be displayed directly from a smartphone or tablet PC on the huge 68.6 cm (27″) screen A practical side effect the mobile gadgets get charged at the same time The LED model utilises the high-quality IPS display technology, which, besides providing a strong contrast und a brightness of 250 cd/m², stands for exceptionally good colour fidelity and viewing angle stabilit A big stage for your photos and videos!

Roughneck Multi-Purpose Bar Set 5 Piece, at Maplins
The 'Roughneck' ROU64965 5 piece multi-purpose bar set consists of one each of the following:- 12 inch x 1/2 inch hex Traditional Wrecking Bar...Suitable for pulling large nails, wrecking and dismantling.18 inch x 5/8 inch hex Traditional Wrecking Bar...Suitable for pulling large nails, wrecking and dismantling.7 inch Utility Bar...Suitable for pulling nails, wrecking, dismantling and prying.15 inch Utility Bar...Suitable for pulling large nails, wrecking, dismantling and prying.24 inch x 3/4 inch Aligning Bar...Suitable for prying and aligning bolt holes and connecting hardware.

Replacement lamp for BOXLIGHT-CP-320ta, at Maplin
•Complete projector lamp for the BOXLIGHT-CP-320ta• Compatible with project manufacturer part code(S)-CP320TA-930• Expected lamp life of 2000 Hours• 200W Lamp Wattage If possible please follow the user manual for your projector model. & nbsp; How to take the lamp out of the projector : & nbsp; 1. Turn the projector off by pressing the Power button 2. Allow the projector to cool down for 30 - 45 minutes 3. Disconnect the projector from the power cable 4. Unscrew the screws on the lamp compartment cover, lift and remove 5. Unscrew the screws on the lamp module 6. Lift up the handle on the lamp and pull the lamp out slowly and carefully & nbsp; How to replace the bulb on the lamp & nbsp; Always use the appropriate tools to uninstall and install the bulb. In most cases you will only require standard screwdriver. & nbsp; Once the old lamp has been removed the new lamp can be installed ; & nbsp; 1. Place the new lamp into the open lamp compartment of the projector 2. Ensure the lamp is in the same position and orientation as the old lamp before it was removed 3. Press the lamp into the projector firmly to ensure the lamp and power connector are seated securely 4. Tighten any fixing screws where present 5. Replace the lamp compartment cover and replace the fixing screws 6. Reset the lamp timer & nbsp; On some projector models there is a need to change a setting on the projector so the projector knows there is a new lamp installed. This is only the case on some models, please refer to your user manual. & nbsp; Important: & nbsp; Do not touch the glass area of the lamp with bare hands. & nbsp; Natural oil from your hands can seriously impact on the performance of the unit or cause the lamp to shatter when it reaches very high temperatures. & nbsp; Use a dry cloth to clean the lamp if it was accidentally touched.

Compatible Canon Camera Battery NB2L 7.2V, at Maplin
•Compatible replacement for Canon NB2L Camera Battery•7.2V•550mAh•Li-ionGeneric replacement for Canon NB2L battery suitable for the following cameras:Canon EosDigitalRebelXTCanon Eos350DCanon Eos400DCanon PowershotG7Canon PowershotS30Canon PowershotS40Canon PowershotS45Canon PowershotS50Canon PowershotS60Canon PowershotS70Canon PowershotS80

BT DUET 210 WHITE, at Maplins
The BT Duet 210 corded telephone is an affordable but elegant small gondola phone that is will sit on a desk or table or is wall mountable. It has a light that flashes when you have an incoming call. It is also fitted with an inductive coupler so it is hearing aid compatible Other features with this product include recyclable packaging, 10 quick dial memories, 1 standard ringtone, ringer volume control with 'off', visual ring indicator and a secrecy feature. This product is also PBX compatible with PBX access code. No batteries or power supply unit are required with this product. The BT Duet 210 is highly suitable for the elderly with its easy to use keypad, its compatibility with hearing aids and ringer indicator.10 number memory; Last number redial; LED call indicator; Mute facility; Wall Mountable

Replacement lamp for EPSON-EB-S02, at Maplins
•Complete projector lamp for the EPSON-EB-S02• Compatible with project manufacturer part code(S)-ELPLP67 / V13H010L67• Expected lamp life of 4000 Hours• 200W Lamp Wattage If possible please follow the user manual for your projector model. & nbsp; How to take the lamp out of the projector : & nbsp; 1. Turn the projector off by pressing the Power button 2. Allow the projector to cool down for 30 - 45 minutes 3. Disconnect the projector from the power cable 4. Unscrew the screws on the lamp compartment cover, lift and remove 5. Unscrew the screws on the lamp module 6. Lift up the handle on the lamp and pull the lamp out slowly and carefully & nbsp; How to replace the bulb on the lamp & nbsp; Always use the appropriate tools to uninstall and install the bulb. In most cases you will only require standard screwdriver. & nbsp; Once the old lamp has been removed the new lamp can be installed ; & nbsp; 1. Place the new lamp into the open lamp compartment of the projector 2. Ensure the lamp is in the same position and orientation as the old lamp before it was removed 3. Press the lamp into the projector firmly to ensure the lamp and power connector are seated securely 4. Tighten any fixing screws where present 5. Replace the lamp compartment cover and replace the fixing screws 6. Reset the lamp timer & nbsp; On some projector models there is a need to change a setting on the projector so the projector knows there is a new lamp installed. This is only the case on some models, please refer to your user manual. & nbsp; Important: & nbsp; Do not touch the glass area of the lamp with bare hands. & nbsp; Natural oil from your hands can seriously impact on the performance of the unit or cause the lamp to shatter when it reaches very high temperatures. & nbsp; Use a dry cloth to clean the lamp if it was accidentally touched.

(Used) Swann ADS-466 720p Day & Night Outdoor Bullet IP Camera, at Maplin
•Clear resolution, 1280 x 720 TV Line camera with •Powerful night vision up to 15m•IP CCTV technology for straight forwards and easy networking of your camera •Viewing angle of 50 degrees to monitor the area•IP66 weatherproof rated for use indoor or outdoorSpecial Features•Mobile alerts via Swann App to let you know when an alert is trigged •One way Audio to hear what’s going onWhat are the benefits of my Wi-Fi Camera?The Swann ADS-466 Camera is a great outdoor and indoor IP Camera with Wi-Fi compatibility. The camera has a viewing angle of 50 degrees. The HD 720p with 1280 x 720 TV Lines resolution is good enough to pick up the fine details such as people’s faces and number plates. The Swann ADS-466 also sends one way audio for monitoring and recording. With its powerful 30 infra-red Led black & white night vision you can still record up to 15m from the camera.Easy to set upEverything you need to install this camera is included in the box including an Ethernet cable, bracket and screws for set up. This camera can be viewed remotely through the use of a free Swann App. The camera is wireless through Wi-Fi so no video cable is needed (power cable required). The Swann ADS-466 records to a secure Cloud server when activated. Where can I use my Camera? The Swann ADS-466 camera is a great versatile IP camera suitable for indoors and outdoors with its IP66 weatherproof rating. The camera comes equipped with an adjustable sunshield and robust build. The Swann ADS-466 camera is a bullet camera which delivers maximum flexibility and gives a wide range of mounting options and angles.

TomTom Go 6000 6 Inch GPS with Lifetime European Maps & Live Traffic, at Maplin
•6" (15 cm) Capacitive Touch Screen•Lifetime TomTom Traffic: Drive with world-class traffic information•Lifetime Map Updates •Pinch to Zoom: Explore the map with your fingertips •Spoken Street Names •Click & Go Mount •IQ RoutesFeel on top of your journey like never before. The all new TomTom Go has been completely re-designed to put you in control of your drive. Make the smartest driving decisions by knowing precisely what is going on around you and what lies ahead. The interactive map puts the world at your fingertips. Simply zoom in and out to find and explore places on the map. Tap on the map to get an instant route to your destination.Lifetime TomTom Traffic Always allows you to drive with world-class traffic information. Get to your destination faster with precise and accurate, real-time detail. It pinpoints exactly where delays start and end so you always know your fastest route.3D Maps show buildings and landmarks in stunning 3D. With 3D Maps, you’ll always know exactly where you are.Detailed coverage for the following:Andorra, Austria, Belgium, Croatia, Czech Republic, Denmark, Estonia, Finland, France, Germany, Gibraltar, Greece, Hungary, Ireland, Italy, Liechtenstein, Lithuania, Luxemburg, Malta, Monaco, the Netherlands, Norway, Poland, Portugal, Romania, San Marino, Slovakia, Slovenia, Spain (incl. Canary Islands), Sweden, Switzerland, Vatican City, United Kingdom (incl. Channel Islands)Partial coverage for the following:Bulgaria, Latvia, Montenegro, Russian Federation, Serbia, TurkeyConnecting RoadsAlbania, Belarus, Bosnia-Herzegovina, Macedonia, Moldavia, Ukraine

16x Speed DVD R 10 Pack, at Maplin
•For higher volume duplication runs•4.7GB, 120 minutes' storage•Suitable for consumer DVD recorders•Digital quality sound and vision•Ideal for video, audio and data applications

2-Power CBI3026B Laptop Battery - Main Battery Pack 7.4V 6900mAh, at Maplin
Laptop, Main power battery for portable computers•Lithium ion, Newer type of rechargable, giving best performance for a rechargable.•EAN: 5055190114278•Equivalent Part Number: AL23-901•Number of cells: 6•Capacity: 6900.0mAh•Voltage: 7.4VMain Battery Pack 7.4V 6900mAh

Flexible Jumper Wire 200mm Flex/ 225mm Overall Length, at Maplin
•Pack of flexible jumper wires for use with our plugblocks•Wires are terminated in hard pins at each end•10 strands of insulated 0.16mm copper conductor with a 7mm long, 0.6mm diameter pin•Supplied in pack of 10

Canon EOS 100D 18 Megapixel Digital SLR Camera with 18-55mm Lens, at Maplins
18 Megapixels• EF-S 18-55mm Lens• 3-inch LCD Screen18 Megapixels, EF-S 18-55mm Lens, 3-inch LCD Screen - 1 Year Warranty

Replacement lamp for SONY-VPL CX70, at Maplin
•Complete projector lamp for the SONY-VPL CX70• Compatible with project manufacturer part code(S)-LMP-C161• Expected lamp life of 2000 Hours• 165W Lamp Wattage If possible please follow the user manual for your projector model. & nbsp; How to take the lamp out of the projector : & nbsp; 1. Turn the projector off by pressing the Power button 2. Allow the projector to cool down for 30 - 45 minutes 3. Disconnect the projector from the power cable 4. Unscrew the screws on the lamp compartment cover, lift and remove 5. Unscrew the screws on the lamp module 6. Lift up the handle on the lamp and pull the lamp out slowly and carefully & nbsp; How to replace the bulb on the lamp & nbsp; Always use the appropriate tools to uninstall and install the bulb. In most cases you will only require standard screwdriver. & nbsp; Once the old lamp has been removed the new lamp can be installed ; & nbsp; 1. Place the new lamp into the open lamp compartment of the projector 2. Ensure the lamp is in the same position and orientation as the old lamp before it was removed 3. Press the lamp into the projector firmly to ensure the lamp and power connector are seated securely 4. Tighten any fixing screws where present 5. Replace the lamp compartment cover and replace the fixing screws 6. Reset the lamp timer & nbsp; On some projector models there is a need to change a setting on the projector so the projector knows there is a new lamp installed. This is only the case on some models, please refer to your user manual. & nbsp; Important: & nbsp; Do not touch the glass area of the lamp with bare hands. & nbsp; Natural oil from your hands can seriously impact on the performance of the unit or cause the lamp to shatter when it reaches very high temperatures. & nbsp; Use a dry cloth to clean the lamp if it was accidentally touched.

Van Damme/Neutrik Instrument Cable 6.35mm Mono Jack to XLR Socket 3m Black, at Maplins
•For balanced audio outputs to unbalanced jack inputs•Low noise and high flexibility for on stage use•Dual thermoplastic/lapped copper screens for excellent noise rejection•Combination of silver plated and plain ultra pure oxygen free copper conductors for unsurpassed sound quality•Terminated using 2% Silver solder - lead free RoHS compliant•Neutrik mono jack NP2X to XLR female NC3FXXVan Damme Pro Grade Classic XKE Instrument Cable is a relatively low capacitance unbalanced audio cable for use with guitars, keyboards and other unbalanced input or output devices. Its tight construction and dual screens of conductive thermoplastic and close lapped copper ensure noise free handling and excellent noise rejection making this cable ideal for on stage use. Each cable is terminated with a Neutrik mono jack NP2X and 3 pin female XLR NC3FXX

Whites MXT Spectrum E-Series Metal Detector, at Maplin
•Feature packed and simple to operate quality metal detector•Has everything you need to locate and identify coins, jewellery and other targets•Ground cancelling capability to automatically eliminate heavy ground mineralisationMXT Features Three complete separate programs with separate target responses, display information, and audio frequencies. Coin and jewellery mode :Coins and rings in, pull tabs out! The display offers VDI (visual discrimination indication) -95 to +94, target blocks coin/jewellery/trash target labels, automatic battery check, low battery alert, overload alert, and depth reading. Also available is knob adjust discrimination, gain threshold, plus an alternate trigger mode "pull tab notched out"...Impressive Depth! General Search Mode: The display offers VDI -95 to +94, target blocks, target labels, automatic battery check, low battery alert, overload alert and depth reading. Also available knob adjust discrimination, gain and dual threshold. Three alternate trigger modes allows for your personal preferences. Unique audio response similar to mixed-mode audio, a favourite of professional detectorists. Prospecting Mode:The display offers vdi -95 to +94, % probability, ground phase, automatic battery check, low battery alert, and overload alert. When using the Prospecting Mode the knob adjust discrimination becomes an adjustment for SAT speed. Each operating mode contains optional search and discriminate methods, i.e., Disc Notch, Mixed Mode Audio, VCO and much more! Automatic Ground Balance - simple, lightening fast, and accurate. From mountain minerals to salt water. 3 easy to adjust knobs - Gain, Threshold and all new "Dual Control" allows discrimination and SAT speed adjustment. 3 toggles, Mode, Pinpoint and Track.It may be illegal to use a metal detector in some Countries or States please check with you local government department before using this device.

Maplin Gold Plated Twist On F Plug RG59, at Maplin
•A high quality twist on F plug designed to suit RG59 type cable•Simply prepare the cable end and screw the plug onto the cable

Twin Phono Male to Twin Phono Female 3m, at Maplins
• Nickel plated connectors • Fully screened audio cable • Durable PVC jacket • Cable strain relief to protect the cablePhono plug to phono socket. This lead is ideal for extending existing phono cable runs.

Juice Sound Square Portable Bluetooth Speaker Green, at Maplins
• 3 W output in a sleek, square box• 10m wireless range with Bluetooth v3.0 technology• 3.5mm line input can connect MP3 players, tablets, PCs • Rechargeable battery gives you up to 10 hours of playback• Small size makes it great for travellingPacking a huge sound into a tiny square, the Juice SoundSquare offers excellent bass response. With a frequency response of 20Hz to 20kHz, deep bass tones are reproduced with ease and high pitches sing with absolute clarity. The small size makes it a perfect fit for parties, picnics, hotel rooms and long trips.How long will it take to charge and how long can I use it for?This tiny cube only requires a two hour charge and with a 1000 mAh battery built in, the Juice Sound square has superior battery life. You can play audio up to six hours using Bluetooth and up to 10 hours using the 3.5mm jack connection.Is it wireless and if so what is its maximum range?If you’re using a smartphone then there’s no need to worry about wires. Pair your phone through Bluetooth and enjoy up to 10 metres of wireless audio freedom.What if I don’t have Bluetooth on my device?For devices such as MP3 players, tablets or PCs, the Juice Sound Square has a 3.5mm stereo jack connection that can fit into the earphone output on any audio device giving you even more freedom. How loud is this speaker?3 W power output makes this speaker louder than a lot of its larger counter parts, if you’re looking for a solution that gives you great audio projection in a pocket sized box then look no further than the Juice Sound Square.

2x12V 6VA Chassis Mounting Mains Transformer, at Maplins
•6VA Clamp Mounting Transformer•Mains: 0 – 115V or 0 – 230V•Double Secondary Winding•Temperature Class B (130°C)•Dielectric Strength: 3750 Vrms•Regulation: 24%6VA Chassis Mounting Mains Transformer

Snowball iCE HD Audio USB Microphone, at Maplin
•Add HD audio to recordings for YouTube, SoundCloud, Myspace and more•Improve audio quality on Skype, Windows Live Messenger, Google Talk, Yahoo Messenger and more•Record instruments, vocals, bands and much more•Create podcasts and add narration to your home movies•Custom condenser capsule offers crystal clear audio•Easy Plug n Play directly to your Mac or PC - no drivers to install•Adjustable desktop mic stand and USB cable•Dimensions (L x W x H): 102 x 102 x 102 mm•Weight: 1.1 kgIt's never been easier to get high quality audio with your computer!Home, office, anywhere - the Snowball USB microphone delivers HD-quality audio that's light-years ahead of your computer's built-in microphone.

Flexipads World Class Sanding Super Pad 150mm PSA Self Stick M14 for Sander & Po, at Maplin
The Flexipad Medium Density Pads are suitable for polishing and grinding. The backplate is made from impact resistant synthetic nylon which is bonded to microcellular polyurethane. Excellent resistance to initial and continuing tearing, oil and ageing. Made in Great Britain Extremely durable yet flexible backing pad for use with sander polishers. Thread: M14 x 2 internal.Type: Self Stick.Size: 150mm.

Replacement lamp for EPSON-EMP-7950, at Maplins
•Complete projector lamp for the EPSON-EMP-7950• Compatible with project manufacturer part code(S)-ELPLP22 / V13H010L22• Expected lamp life of 2000 Hours• 250W Lamp Wattage If possible please follow the user manual for your projector model. & nbsp; How to take the lamp out of the projector : & nbsp; 1. Turn the projector off by pressing the Power button 2. Allow the projector to cool down for 30 - 45 minutes 3. Disconnect the projector from the power cable 4. Unscrew the screws on the lamp compartment cover, lift and remove 5. Unscrew the screws on the lamp module 6. Lift up the handle on the lamp and pull the lamp out slowly and carefully & nbsp; How to replace the bulb on the lamp & nbsp; Always use the appropriate tools to uninstall and install the bulb. In most cases you will only require standard screwdriver. & nbsp; Once the old lamp has been removed the new lamp can be installed ; & nbsp; 1. Place the new lamp into the open lamp compartment of the projector 2. Ensure the lamp is in the same position and orientation as the old lamp before it was removed 3. Press the lamp into the projector firmly to ensure the lamp and power connector are seated securely 4. Tighten any fixing screws where present 5. Replace the lamp compartment cover and replace the fixing screws 6. Reset the lamp timer & nbsp; On some projector models there is a need to change a setting on the projector so the projector knows there is a new lamp installed. This is only the case on some models, please refer to your user manual. & nbsp; Important: & nbsp; Do not touch the glass area of the lamp with bare hands. & nbsp; Natural oil from your hands can seriously impact on the performance of the unit or cause the lamp to shatter when it reaches very high temperatures. & nbsp; Use a dry cloth to clean the lamp if it was accidentally touched.

Kitronik LED Picture Frame Kit, at Maplin
• Build your own 'light up' picture frame or mirror• Can be used with a wide variety of LEDs• A great way to practice your soldering skills• Designed and manufactured in the UK by KitronikThis Kitronik LED Picture Frame Kit allows you to illuminate the edge of a picture frame using a number of LEDs. This happens for a period of time when the button is pressed. The duration is set using a trimmer potentiometer and can be anything from a few seconds to 30 minutes. You can choose which LEDs they would like to use. These are connected to the terminal block (along with a current limit resistor). LEDs and current limit resistor are not included. The board can drive 200mA, which is about 10 high brightness LEDs.This kit includes:1 x PP3 Clip lead1 x Battery holder (3x AA)1 x Terminal block (2 way)1 x Push to make switch1 x Capacitor, electrolytic, 16V, 220uF1 x 10M Pot2 x 10K resistor2 x N channel FET (2N7000)1 x 0.5 metre length of single core wire1 x Picture frame LED driver PCBPCB dimensions: 58mm x 28mm.This kit is supplied as a pack of parts and requires soldering. Supplied in a poly bag.Selecting LEDs for using with the circuit:The circuit can be used with a variety of LEDs. Below are a selection of LEDs that can be used. Also listed is the current limit resistor that will be required if four LEDS are used.Standard red = 33ohm resistorStandard green = 33ohm resistorStandard yellow = 33ohm resistorStandard white = 22ohm resistorStandard blue = 22ohm resistorUltra bright red = 33ohm resistorUltra bright white = 68ohm resistorUltra bright blue = 68ohm resistor

Maplin Digital Audio Optical Cable 5m, at Maplins
• Ideal for use with HDTV and PC surround sound systems, HD Freeview and Freesat boxes, and the PS3, PS4 and Xbox One games consoles.• Includes mini-plug TosLinkTM adapters• Pure plastic optical fibre (POF) • Gold-plated connectors• Durable and highly flexible outer jacket• 5 Year WarrantyDigital Optical cable is also known as a TOSlinkTM connector. It carries the digital S/PDIF audio standard, which can transmit stereo audio or compressed 5.1/7.1 channel surround sound, all in one cable.It is an audio cable commonly used when connecting high quality digital-grade equipment in home and DJ audio systems, PC audio, and in speaker systems for TVs and games consoles.The Maplin Range – Premium construction and specification, with marketing leading cable technologies.The Maplin Cable range delivers the latest technology first and foremost, ensuring compatibility with the latest hardware standards.Our Maplin cables feature fully wired connectors and shielded cables where required throughout the range, delivering high fidelity audio and video signals across a vast range of connectors and dedicated adapters.The Maplin cable range features hard wearing cable construction, with colour-coded, compact connectors available for almost any use. All Maplin cables are quality assured, with a 5 year warranty across the range.

Belkin Dash Tab Cover for iPad Air, at Maplin
•Multiple viewing angles•Comfortable typing angle•Magnetic tab closureA Classic Favourite, RevampedElevate your entertainment experience with our Dash Tab iPad Air Cover. We've given one of our best-selling favourites a makeover--with the same durable construction and thoughtful design details now in a fresh new look.Secure FitThe Dash Tab Cover for iPad Air is designed first and foremost to keep your iPad Air safe and secure. Our integrated X-Frame design has protective corners made of a soft rubber that gently lock your iPad Air into place. Just bend back the corners when you want to remove it.Quality Craftsmanship & MaterialsThe Belkin Dash Tab Cover iPad Air Case is made of a durable material with a dashed pattern along the spine that adds a pop of colour and touchable texture. It's then moulded to the shape of your iPad Air for an incredibly tailored fit. A velvety smooth inner lining keeps your screen safe and cushioned.Choose Your Viewing AngleUse the Dash Tab iPad Air Cover to position your iPad Air at the angle that suits you best. The inner lining is set with grooves at various positions so you can slide your iPad Air closer to you or angle it further away--whatever's most comfortable for you.Folds Into The Perfect Angle For TypingThe Dash Tab Cover for iPad Air also folds into a lower, more ergonomic angle that puts less stress on your wrists when typing on your touchscreen.Keep A Tab On EverythingThe Dash Tab iPad Air Cover features an integrated magnetic tab that keeps the front cover closed when you're on the go. The same tab can be used to hold the cover back and out of the way while you're using your iPad Air.

Telephone & ADSL Broadband Wall Plate, at Maplin
This flush mount socket incorporates both a telephone socket and an ADSL broadband socket in one. The ADSL socket is pre-fitted with a microfilter designed to minimise the effect of ADSL noise on your telephone or other telecom products. The socket dimensions are 84 mm x 84 mm to fit a standard electrical single pattress box.

10m LSZH SC/ST DLX 62.5/125 MM FBR PATCH, at Maplin
• Weight: 0.158 KG• Warranty: lifetime• SC Connector Dimensions: 10.6mm Height x 26mm Width x 58mm Depth (with installed duplex clip)• ST Connector Dimensions: 9.8mm Height x 19.6mm Width x 59mm Depth• Optical Multimode 1 (OM1) fibre supporting 200/500 MHz.km OFL at 850/1300 nm• Maximum Connector Loss: 0.50 dB• Typical Connector Loss: 0.30 dB• Typical Return Loss: -25 dB• Buffer Material: PVC• Buffer OD: 900 µm• Jacket Material: LSZH PVC (OFNR riser-rated)• Jacket OD: 1.8 mm• Installation Tensile Load: 100 N (22.4 lbs)• Long-Term Tensile Load: 50 N (11.2 lbs)• Maximum Tensile Load: 100 N/cm• Installation (Loaded) Minimum Bend Radius: 5.0cm (1.97in)• Long-Term (Unloaded) Minimum Bend Radius: 3.0cm (1.2in)• Crush Resistance: 750 N/cm• Impact Resistance: 1,000 cycles• Flex Resistance: 5,000 cycles• Attenuation at 1300 nm: 1.0 dB/km• Attenuation at 850 nm: 3.5 dB/km• Operating Temperature: -20Ă‚°C to +70Ă‚°CWith SC to ST termination, this high quality fibre optic patch cable is specifically designed for Fast Ethernet, fibre channel, ATM and Gigabit Ethernet applications. The SC connector features a push-pull locking system while the ST connector features a bayonet locking system.The Low Smoke Zero Halogen (LSZH / LS0H) jacket is composed from materials that lessen the smoke and halogen emissions when the cable is exposed to extreme temperatures.This reduces the amount of harmful toxic and corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal for use where the protection of people and equipment from harmful corrosive gases is absolutely critical.The patented injection moulding process provides each connection greater durability in resisting pulls, strains and impacts from cabling installs.Each cable is 100% optically inspected and tested for insertion loss before you receive it. Attenuation testing performed in accordance with EIA/TIA-455-171A.

GE CSD250/2/SE ingle Ended Cold Start Discharge Lamp 250W, at Maplin
GE CSD250/2/SE ingle Ended Cold Start Discharge Lamp 250WGE CSD250/2/SE ingle Ended Cold Start Discharge Lamp 250WVery high quality discharge lamp often found in the theatre and disco industry.

Cloud CXV-225 2 Channel 100 V Amplifier 2 X 250 W, at Maplin
Cloud CXV-225 2 Channel 100 V Amplifier 2 X 250 W•2 x 250W 100v line•Transformerless output stage for directly driving 100 V-line systems•Output stage clip limiter•Front panel per-channel Protect, Peak and Signal LEDs•Balanced line inputs (0 dBu)Cloud CXV-225 2 Channel 100 V Amplifier 2 X 250 WA 2 Channel amplifier featuring 2 x 250 Watt 100V line with transformer-less topology, mono-stereo switch, variable H.P Filter (20 Hz to 200 Hz), fully protected with LED indication for signal present, clip and protect and fan cooling. Optional VCA modules are available for remote level control, while optional EQ modules for Bose loudspeakers can be fitted to either output.

Low Profile Xenon Flasher Unit – Red, at Maplin
•Add an alarm beacon/flasher to your security system or project•Weatherproof IP65 rated allowing you to use the unit indoors or outdoors•Gives off 100 bright pulses of light per minute ensuring that anyone will be able to notice it•Powered by any 12V power source for greater flexibility of useWhat can I use this flasher unit for?Emit attention grabbing pulses of light with this alarm beacon/flasher unit, which makes it perfect for use with a security system or any project. The unit is designed with Fresnel rings and the sides are striated to ensure the maximum possible amount of light is dispersed. This provides you with 100 bright pulses of light per minute, which is more than enough to alert and startle any burglar trying to enter your home. It can be used indoors and outdoors thanks to the IP65 weatherproof rating. The flasher unit is compatible with and can be powered by any 12V power source at 180mA or more.

Microsoft Wireless Deskset 2000, at Maplin
•Advanced encryption standard (AES) 128-Bit encryption •Taskbar favourites•Windows start button•Pillow-texture palm rest •Comfort and control for either hand •BlueTrack technologyEncryption and comfort at your fingertipsUnlike standard keyboards, this one features Advanced Encryption Standard (AES), which can help protect your personal and business information by encrypting what you type. Enjoy the classically designed keyboard, with a pillow-textured palm rest for support and comfort. The desktop is completed with a wireless, full-size mouse that features enhanced side grips, four-way scrolling and Blue Track technology. Not only is this desktop secure, comfortable and convenient – it’s simple to use—just plug in the transceivers and you’re ready to go!

SMS Audio - STREET by 50 Wired On-Ear Headphones, at Maplin
•Professional Studio SoundBring your music with you in luxurious style with STREET by 50 On-Ear Headphones.Folding headphones with detachable mic cord for tangle free streetwear and transport, plus enhanced bass and ultra plush memory foam earpads ensure a comfortable ride no matter where your music takes you. The STREET by 50 wired headphones feature professionally tuned 40mm driver, professional studio quality sound, high-end styling, enhanced bass, soft memory foam cushions, and passive noise cancellation.The STREET by 50 headphones are currently available in 2 colors: shadow black and ghost white. Each STREET by 50 on-ear headphone includes: removable cable with mic, carry case, soft touch cleaning cloth, owners manual, and product brochure.SMS Audio was developed by international recording artist, actor, and philanthropist Curtis ″50 Cent″ Jackson as the next step in the evolution of personal audio technology.

Omeg 1M Ω Linear Single Gang Potentiometer with Switch, at Maplins
A linear rotary carbon track potentiometer with DPST switch and fitted with printed circuit mounting terminals.

Tactus MagnaTuff Quantum Schmoov Case for iPad Air, at Maplins
•Provides ultimate protection•Slick, smart and stylish•Perfect fit for iPad Air•The built in auto shut-off magnet helps to conserve your iPad battery life•Made with a high quality, durable material to withstand any impact•Soft inner lining to protect the screen•Accessibility to all ports and buttons•Schmoov touch finishWhen I think about my iPad, it’s a device that I use everyday, and take everywhere. Because I need it, and use it constantly, I take protecting it really seriously. I don’t want to simply cover it, or colour it, I want to wrap it in the proverbial cotton wool. The MagnaTuff is that cotton wool. By covering the device front and back, with a hard shell material, I can use my iPad in landscape or portrait whilst still protecting it from scratches or wear. And yet even with the rigid design, I can still sit my device up or angle it for typing with the folding stand. Along with being able to fully use my iPad, what makes the MagnaTuff so indispensable, is the protection it offers in the hands of others. When another person has my device I feel an almost uncontrollable urge to recover it, but with the MagnaTuff, I have piece of mind. And I know that if I drop it, it’s probably going to be ok thanks to my MagnaTuff.

Kauden™ Twin Cat5e RJ45 Faceplate White, at Maplin
•Clear label cover•Standard IDC terminals•Including cable ties•Colour coded for 568B (most common used)CAT5e s the standard set to support data transmissions at frequencies up to 100 Mhz over 100 ohm twisted pair cable . Commonly used to support many applications including:* 100 Mbit/s and 1000BASE-T Gigabit Ethernet networks.* Fast Ethernet* 155 Mbps ATM* PC and Multimedia networking Common 86x86mm standard faceplate size and similar to mains electrical accessories Can be flush or surface mounted and used for many types of IT installations in both home and office. Designed for use with 32mm deep plastic surface box or 35mm deep metal back box for flush mounting

Replacement lamp for EPSON-EMP-7850, at Maplin
•Complete projector lamp for the EPSON-EMP-7850• Compatible with project manufacturer part code(S)-ELPLP22 / V13H010L22• Expected lamp life of 2000 Hours• 250W Lamp Wattage If possible please follow the user manual for your projector model. & nbsp; How to take the lamp out of the projector : & nbsp; 1. Turn the projector off by pressing the Power button 2. Allow the projector to cool down for 30 - 45 minutes 3. Disconnect the projector from the power cable 4. Unscrew the screws on the lamp compartment cover, lift and remove 5. Unscrew the screws on the lamp module 6. Lift up the handle on the lamp and pull the lamp out slowly and carefully & nbsp; How to replace the bulb on the lamp & nbsp; Always use the appropriate tools to uninstall and install the bulb. In most cases you will only require standard screwdriver. & nbsp; Once the old lamp has been removed the new lamp can be installed ; & nbsp; 1. Place the new lamp into the open lamp compartment of the projector 2. Ensure the lamp is in the same position and orientation as the old lamp before it was removed 3. Press the lamp into the projector firmly to ensure the lamp and power connector are seated securely 4. Tighten any fixing screws where present 5. Replace the lamp compartment cover and replace the fixing screws 6. Reset the lamp timer & nbsp; On some projector models there is a need to change a setting on the projector so the projector knows there is a new lamp installed. This is only the case on some models, please refer to your user manual. & nbsp; Important: & nbsp; Do not touch the glass area of the lamp with bare hands. & nbsp; Natural oil from your hands can seriously impact on the performance of the unit or cause the lamp to shatter when it reaches very high temperatures. & nbsp; Use a dry cloth to clean the lamp if it was accidentally touched.

Logitech Anywhere MX Laser Wireless Mouse, at Maplin
•Logitech Darkfield Laser Tracking gives you precise cursor control on virtually any surface•Wireless•The tiny Logitech Unifying receiver stays in your notebook•Take it anywhere thanks to its compact size•Hyper-fast scrolling lets you fly through long documents and Web pages•Able to quickly go back or forward in Web pages with a click of a thumb buttonThe Logitech Anywhere Mouse MX works wherever you do. Thanks to Logitech Darkfield Laser Tracking, you'll get precise cursor control on virtually any surface, even glass tables (4 mm minimum thickness) where optical and standard laser mice fail. You can take it anywhere thanks to its compact size. The tiny Logitech Unifying receiver is small enough to leave in your notebook. Anywhere you go, you'll get things done more comfortably with its sculpted design. You get hyper-fast scrolling to fly through long documents and Web pages with a single spin of the scroll wheel. Plus thumb buttons let you go back and forth between Web pages with just a click.Tiny Logitech Unifying Receiver Stays in Your NotebookWhen sitting at a desk or table, many people choose to add peripherals such as a notebook mouse and keyboard to their computing setup to make it more comfortable. But when it comes time to change locations (e.g. heading home from the office), these peripherals need to be unplugged and each of their USB receivers stored somewhere safe. To solve this problem, Logitech introduced the Logitech® Unifying receiver – a tiny wireless receiver that’s so small it can stay plugged into a laptop at all times and can be paired with up to six compatible Logitech keyboards and mice. Logitech Unifying products are easily identified by the Unifying icon, which appears on the products themselves, as well as on the pre-paired, bundled receiver. There's no need to unplug it when you move around, so there's less worry of it being broken or lost.Comparison of Dark Field LASER Trackingagainst traditional LASER and LED systemsAll optical and laser mice use irregularities in the work surface to track the direction and speed of your mouse. The more irregularities on the surface, the easier it is for the sensor to track your movements. But there just aren't enough irregularities on clear glass for your standard mouse to work.Logitech mice with Darkfield Laser Tracking use two lasers to more effectively collect microscopic details of the tracking surface. When the mouse is used on a regular surface – such as a formica table or a piece of paper – the texture of the surface provides plenty of detail for the lasers to track and requires only one of the lasers to be used. But for high-gloss surfaces that don’t have enough details, such as a glass tabletop, the mouse sensor views the surface itself as black and, instead, tracks the dust and other residuals that appear on the surface. In this case, two lasers are used. The diagram to the left shows a visual representation of how dark field illumination works on both an opaque and a transparent surface.

GW Instek AFG-2005 5MHz Arbitrary Function Generator, at Maplins
• 0.1Hz to 5MHz with 0.1Hz resolution• Supports sine, square, triangular, noise and arbitrary wave forms• 20MSa/s sampling rat, 10 bit vertical resolution• Waveform characteristics easily with numeric keypad and knob selections• Vibrant colour 3.5" LCD screen is very easy to read• USB interface allows remote control and waveform editing• Waveform editing software includedThe AFG-2005 function generator is a DDS (Direct Digital Synthesized) based signal generator designed for education, industry and laboratory requirements. It is an accurate signal source covering the output of sine, square, ramp (triangle), noise and arbitrary waveforms. The 20MSa/s sampling rate, 10 bit vertical resolution and 4k point memory of this generator provide user with a flexible environment for creating the specific waveform output as needed.The user friendly interface of AFG-2005 allows you to set waveform parameters, including waveform type, frequency, amplitude, DC offset, modulation type, and duty cycle, through keypad entry and/or the knob selection, and display the set parameters on the 3.5" LCD screen. Integrated USB provides a convenient method to control and edit the waveform, software is provided.

Luggage Strap in Yellow and Grey, at Maplins
•Ideal for everyday use, weekends away and holidays•Secures your luggage to keep your belongings safe•Makes your bags and cases easier to identify•Designed to fit most types and sizes of luggage•Strong nylon strap extends from 830 to 1660 mmAn easy-to-use bag or case strap designed to fit most luggage types and ideal for everyday use as well as weekends away or long-haul holidays. The Luggage Strap secures your luggage closed, keeping your belongings safe, while also making your travel bags and cases easily identifiable. The Luggage Strap features strong, nylon webbing with a sturdy black clasp and can be extended from a total length of 830 to 1660 mm.

Samsung 1TB 850 Pro SSD, at Maplin
•1TB internal solid state drive (SSD) giving you a large storage capacity for your computer•2.5-inch SATA III 6 GB/s connection with a read speed of 550MB/s and a write speed of 520MB/s for a rapid data transfer and quick start up speed•98,000 input/output per second (IOPS)•Perfect for use in laptops and notebooks to replace your existing hard drive with a bigger, faster and quieter version •V-NAND technology giving you a higher performance out of your SSD•MZ-7KE1T0BWWhat makes this different from the 850 EVO?The 850 Pro is more efficient, as it has a faster sequential read/write speed and a larger amount of IOPS. This means you can get a greater performance out of your SSD and enjoy your computer’s newfound speed.What performance can I expect from this hard drive?This hard drive has a capacity of 1TB, which will allow you to store up to 1,000 hours of digital video, 250 two-hour DVD films, 32,000 digital photos or 16,000 hours of digital music. With a read speed of 550MB/s and a write speed of 520MB/s, you are able to start your computer up quicker, as well as being able to load your files in an instant. What is V-NAND and how does it differ from existing technology?Samsung's flash memory is fabricated using an innovative 3D V-NAND architecture, which stacks 32 cell layers on top of one another rather than trying to decrease the cells' length and width to fit today's shrinking form factors. The result is higher density and higher performance using a smaller footprint and a breakthrough in overcoming the density limits of conventional planar NAND architecture.

Roughneck Sledge Hammer 1.4kg (3lb) 16in Fibreglass Handle, at Maplin
Roughneck Sledge hammers with Fibre glass handles are manufactured from drop forged alloy steel hardened and tempered, with 8-sided 45 degree chamfered precision milled edges. With an Industrial grade epoxy for a longer lasting bond, solid core fibreglass handle with polypropylene cover and double injected TPR soft-grip handle with integral overstrike protection. Roughneck Sledge Hammer with Fibreglass Handle. Handle Length: 16in. Weight: 1.4kg (3lb).

JBL OnBeat Micro Portable Speaker Dock with Lightning Connector, at Maplin
• 4W total output • Connect any iPod or iPhone via the lightning dock connector and charge at the same time• 3.5mm line input provides connection to your smartphone, tablet or MP3 player• Can be powered via the mains or put in batteries to make it truly portable• Up to 5 hours of non-stop playback from one set of batteries The JBL On Beat Micro is a compact speaker with an impressive amount of volume. Using a digital signal processor, this speaker allows you to turn up your favourite songs without distortion. iPods and iPhones can connect via a lightning connector on the top and a USB port supports playback from flash drives and MP3 players. When operating from the mains you can charge your device via the USB port as well. No more power problems, just great sounds.Does the speaker use batteries and how long do they last?You can achieve up to 5 hours playback from 4 AAA batteries or you can power the speaker via the supplied mains adaptor. Devices can charge from the USB port when the speaker is plugged into the mains so you’ll never have to worry about your iPod running out of charge in the middle of a party.What devices are compatible with the speaker?A lightning connector on the speaker supports a range of iPods and iPhones and for devices such as tablets, MP3 players and laptops, a 3.5 mm jack cable is supplied to connect these to the JBL On Beat Micro.How loud is this speaker?Two full range transducers rated at 2W each drive a powerful sound from the speaker. Bass tones will bounce with deep and rich production whilst maintaining a vibrant high pitch range. A frequency response of 110Hz to 20kHz ensures a fantastic sound stage for any genre you decide to listen to.

Maplin DIN Line Socket 5 Pin 180 Degrees, at Maplin
DIN standard socket with solder terminals.

Swann A850 720p HD Outdoor Bullet Camera, at Maplins
•High definition resolution of 720p giving you a clear picture•Powerful night vision up to 30m for clarity in low light•Analogue HD CCTV technology for higher resolution images even in low light conditions •This camera can only be used in combination with Swann’s professional 720p AHD digital video recorders•Viewing angle of 62 degrees to monitor your home or workplace•IP67 weatherproof rated for use indoors or outdoorsWhat are the advantages of a HD camera?The PRO-A850 gives you great images with its 720p equivalent video resolution capable of capturing even fine details. A perfect addition to any of our Swann HD analogue security systems. The wide 62 degree viewing angle is ideal for viewing your property or covering a shop floor or business entrance.Am I able to use the camera at night?With this state-of-the-art high-resolution video technology, you can keep a continuous eye out for thieves, vandals, break-ins or any other suspicious activity. With the powerful infrared night vision you can clearly capture crystal clear images from up to 30 meters away in low light, making it an ideal security solution for a variety of retail, office, commercial and home needs. Is the camera easy to set up?Everything you need is included in the pack including 18m BNC cable for connecting to a Swann 720p AHD DVR and power, BNC to RCA connector for connecting to a TV, power adapter, user guide, deterrent security stickers and more. When combined with a Swann HD DVR you'll be able to record, store, and remotely view footage in 720p high definition for total peace of mind. Best of all, their plug and play installation makes set-up incredibly simple, indoors and outdoors.

26-Piece Tri-Fold Precision Tool Kit, at Maplin
•Contains 6-piece precision screwdriver set•Includes socket set and interchangeable screwdriver bits•Also includes pliers, cutters and tweezers•Supplied in a folding storage case1 x mini long nose pliers1 x mini side cutters1 x tweezers1 x 75mm extension bar4 x sockets: 5mm, 6mm, 8mm and 10mm1 x magnetic bit holder3 x slotted screwdriver bits: 5mm, 6mm and 7mm3 x Phillips screwdriver bits: PH1, PH2 and PH33 x star screwdriver bits: T10, T15 and T201 x bit adaptor6 x precision screwdrivers1 x folding storage caseWarranty: 5 years

Roughneck Quick Dry Polo Shirt in Blue XX Large, at Maplin
•Quick dry polo shirt •Lightweight breathable polyester •Wicks moisture away from the skin •Colour: BlueThis Roughneck Quick Dry Polo Shirt is made from 170 gram quick-dry, lightweight and breathable polyester which has been designed to keep you dry by wicking moisture away from the skin. Sizes: M: 100-104cm (39-41in).L: 108-112cm (42-44in).XL: 116-124xm (46-48in).XXL: 128-132cm (50-52in).The RNKBLPOLOXXL Quick Dry Polo Shirt has the following specifications: Size: Extra Extra Large (XXL). Colour: Blue.

Luceco LED GU10 4000K 5W 370lm Bulb, at Maplin
•5W power consumption by this LED bulb gives you an equivalent 50W light output, saving you up to 90% in electricity compared to a standard bulb•370lm output•GU10 light fitting used in directional lighting products such as desk lamps, down lighting and display lighting•25,000 hours lifespan to save you even more money over the lifetime of the bulb compared to halogen bulbs•Dimmable through the use of a dimmer to create your perfect light level•4000K natural white effect which is great for kitchens and bathrooms•38 degree beam angle to focus the light on a specific segment in the room•Three year warranty included for peace of mind (proof of purchase required)Is the bulb suitable for what I need?The bulb has a GU10 fitting which is compatible with a variety of spot lights and down lights. The equivalent to a 50W halogen bulb, this bulb gives a bright output of 370lm while only using 5W of power. The reduced power will save you both electricity and money. The bulb gives you a 4000K natural white light which gives a cool lighting effect and is dimmable to give you the perfect light level in your kitchen or bathroom.Why should I buy LED over halogen?If you’re bored of how often you have to replace light bulbs in your home, LED bulbs are the solution. Using the latest generation technology they have an impressive lifespan of up to ten times longer than a halogen bulb. You’ll also use less power for the same level of lighting saving you money off your electricity bill. LED bulbs are also available in a wide variety of fittings, shapes and styles so that you will be able to find an LED bulb to suit your needs.

Alto Truesonic TS115W 400W Active Speaker, at Maplins
•400W continuous (RMS) output with 800W peak for a clear quality sound output•An active speaker with a built-in amplifier•Ideal for a venue of virtually any size•6.35mm jack and XLR inputs to give you a maximum compatibility with an audio input•An XLR output is built in to allow you to connect this speaker directly with another•36mm top hat mount to allow you to easily fit the speaker directly into a stand or bracketHow powerful is this speaker?With its 800W peak output, the speaker will reach its full potential in a venue of virtually any size. The built in control panel will allow you control the inputs that are connected to the speaker including the USB and microSD slots that are built in.What connections does this speaker come with?The Alto TS115W comes fitted with a 6.35mm (1¼ inch) connector as well as XLR connectors to give you the ability to connect virtually anything you would need to this speaker. A USB port and microSD slot is also included so that you can connect a USB memory stick or microSD card directly into the speaker for its content to be played directly. An XLR output is also included to allow you to connect this speaker directly with another.Is the speaker wireless?This speaker comes with Bluetooth built in to allow you to connect any enabled product without any cables. This will allow the connection of many smart phones, tablets and MP3 players wirelessly to the speaker.Does the speaker require an amplifier?This is an active speaker with a built-in amplifier. This means you can connect an iPod or CD player directly to the speaker for it to play.What is the difference between RMS and peak output?RMS, which measures a speaker’s average power output, will allow you to compare various speakers of a similar size regardless of brand. The peak output is the maximum power the speaker can handle from the amplifier.

24V 30A Solar Charge Regulator, at Maplin
•Regulates the charging and discharging cycles of batteries•Large LCD screen for easy reading•Fixing holes to permanently mount the unit•Battery reverse polarity protection•Overload and overcharge protection•Battery open circuit protection•Load short circuit protection•Deep discharge protection•Suitable for loads up to 30A (500W solar panel)

Two Tone Mini Siren, at Maplin
An extremely loud two-tone piezo-electric siren mounted in a sturdy cream plastic case. The electronics which drive the piezo element and give the siren its characteristic sound, are contained within the unit on a PCB, and the overall frequency range can be varied by means of a preset on this board. Two links, A and B, are also present which, if bridged with solder, determine the mode of operation (see table). The board is accessible by removing the bottom mounting plate (secured by four screws) from the main body.Operating Modes:Both links open:Single tone operationLink A bridged:Pulsed high toneLink B bridged:Two-tone (as supplied)Both links bridged:Pulsed low tone

Maplin Electrical is one of the UK's leading Electrical retailers, offering the most competitive choice of mainly branded, quality products at consistently the lowest prices in the local market. The core range of Maplin products include TV, video, audio, Cooking, MDA, Small domestic appliances, Communications, Multimedia, Electronics and New technology accessories. Maplin Stores are unrelated to the Dixons Stores Group - which includes Dixons, Currys, PC World and The Link.