Buying direct from Maplin saves you money. Maplin cuts amazing deals with manufacturers with the Maplin bulk-buying power and passes on big, big savings to their customers. Maplin customers know they won't find such good deals on Electrical products or such good service at such low prices anywhere else!

T-Mobile SIM Card, at Maplin


Replacement lamp for PANASONIC-PT-AE500, at Maplins
•Complete projector lamp for the PANASONIC-PT-AE500• Compatible with project manufacturer part code(S)-ET-LAE500• Expected lamp life of 2000 Hours• Long Life If possible please follow the user manual for your projector model. & nbsp; How to take the lamp out of the projector : & nbsp; 1. Turn the projector off by pressing the Power button 2. Allow the projector to cool down for 30 - 45 minutes 3. Disconnect the projector from the power cable 4. Unscrew the screws on the lamp compartment cover, lift and remove 5. Unscrew the screws on the lamp module 6. Lift up the handle on the lamp and pull the lamp out slowly and carefully & nbsp; How to replace the bulb on the lamp & nbsp; Always use the appropriate tools to uninstall and install the bulb. In most cases you will only require standard screwdriver. & nbsp; Once the old lamp has been removed the new lamp can be installed ; & nbsp; 1. Place the new lamp into the open lamp compartment of the projector 2. Ensure the lamp is in the same position and orientation as the old lamp before it was removed 3. Press the lamp into the projector firmly to ensure the lamp and power connector are seated securely 4. Tighten any fixing screws where present 5. Replace the lamp compartment cover and replace the fixing screws 6. Reset the lamp timer & nbsp; On some projector models there is a need to change a setting on the projector so the projector knows there is a new lamp installed. This is only the case on some models, please refer to your user manual. & nbsp; Important: & nbsp; Do not touch the glass area of the lamp with bare hands. & nbsp; Natural oil from your hands can seriously impact on the performance of the unit or cause the lamp to shatter when it reaches very high temperatures. & nbsp; Use a dry cloth to clean the lamp if it was accidentally touched.

Assemtech Micro Reed Switch N/O, at Maplin
•A Rhodium contact reed switch•Low contact resistance and high speed operation•Suits many applications including sensors, proximity switching instrumentation and alarm solutions

Freestanding Heated Clothes/Towel Rack (Type UK Model Plug Amp (A) 13), at Maplins
Freestanding Heated Clothes/Towel Rack (Type UK Model Plug Amp (A) 13)•Simple installation for minimum hassle•Stylish yet practical curvaceous design•Slim, lightweight and freestanding, ensuring optimum portability•Simple ON/OFF switch for easy operation•Affordable and suitable for use year roundFreestanding Heated Clothes/Towel Rack (Type UK Model Plug Amp (A) 13)Dry your washing and air clothes or towels even when the central heating is switched off with this stylish heated rack. Exceptionally good value for money, it will help ensure your garments are kept lovely and warm whatever the weather! This clever clothes rack is freestanding with a secure base, meaning you can easily place it in any room of your home with minimum fuss. Featuring a curvaceous, smooth flowing design shape to maximise hanging space and a small on/off switch, this product will instantly start heating up - so you can get to airing and drying your laundry immediately. Toasty!

Toshiba 3TB Stor.E Canvio Desktop External Hard Drive - USB 3.0, at Maplin


Swarfega Jizer Degreaser 500ml, at Maplins
•Parts degreaser which quickly dissolves heavy deposits of mineral oil, grease, tar, bitumen and waxes•Can be used for removing oil and grease marks from floor surfaces, tar spots and oil from body work•Also suitable for cleaning paint brushesParts degreaser which quickly dissolves heavy deposits of mineral oil, grease, tar, bitumen and waxes.Can be used for removing oil and grease marks from many floor surfaces, tar spots and oil from body work and cleaning paint brushes.Water rinsable.Size 500ml AerosolNot many people know that when the Swarfega product was first invented by AB Williamson, it actually started out as Deb Silkware Protector; a mild solution for hand-washing silk stockings, intended to prevent them from laddering. The war diverted silk to parachute production, and the Americans arrived in Britain with nylons destroying the silk stocking market — and the need for Deb Silkware Protector. In 1947, Swarfega was born; it was the first hand cleaner of its type in the world. The name derives from ‘swarf’, being the old Derbyshire engineering term for oil and grease and ‘ega’, as in ‘eager to clean’. In its early days, Swarfega was available in places frequented by men such as motorbike shops, chemists and even barbers. Now, with a range of over 40 specialist cleaning products from hand cleansers to surface cleaners, Swarfega is as popular as ever. Throughout industry, Swarfega has researched and developed the solution to your cleaning problem. They also have a service to match; if you’re not sure which products meet your requirements, one of Deb’s Technical Service team will analyse the problem and suggest the correct solution.

Lexmark Extra High Yield Return Program Print Cartridge Black for C792 Series Co, at Maplins
Use Lexmark consumables and supplies with your Lexmark printer to give you crisp, sharp results, every time. Lexmark printers and have been designed and built to work together with their custom-designed consumables and supplies. This ensures that your text and graphic printing is clear and sharp, every time you print.Original Lexmark return program laser toner cartridge with a page life of approx 20,000 pages suitable for Lexmark CX510de Lexmark C792 Series Printers

PNY NVIDIA NVS 300 Graphics Card 512MB DDR3 PCI-Express 2.0 x16 with DMS59 to Du, at Maplin
• PNY NVIDIA NVS 300 Graphics Card with DMS59 to Dual DisplayPort Adaptor Cable (Retail)• Memory Size: 512MB DDR3• Graphics Bus: PCI Express 2.0 x16• 1 x DMS-59 video port• Max Displays/Board DisplayPort : 2 ultra-high resolution displays at 2560 x 1600• Power : 17.5W - Passive cooling• Mosaic Mode Enabled : Yes (Windows 7 only)• nView Enabled• Low-profile form factor• Three years warrantyThe NVIDIA NVS 300 by PNY, multi-display business graphics solution, designed for small and standard form factor systems, delivers reliable hardware and software for a stable business environment. Tested on leading business applications, NVS 300 by PNY is capable of driving two VGA, single link DVI or DisplayPort displays. With NVIDIA Mosaic and NVIDIA nView technologies built in, you can span and efficiently manage your entire Windows desktop across multiple displays.GPUChipset : NVIDIA Quadro NVS 300 Cooling System : Passive DisplayMaximum Resolution : 2560 x 1600 PixelsMemoryMemory : 512 MB DDR3 Interfaces/PortsVideo Card Bus Type : PCI Express PhysicalForm Factor : Graphics Card In The Box : NVIDIA NVS 300 by PNY x16 PCIe graphics board, Full height bracket (attached to card), Low profile bracket (unattached), DMS-59 to dual DP adaptor cable, Driver CD for Windows 7, Vista, XP (32-bit and 64-bit), Installation Guide (PDF) Additional SpecificationsChipset Additional Information : with CUDAModel Name : NVS 300Operating Systems Supported : Microsoft Windows 7 (64-bit and 32-bit), Microsoft Windows Vista (64-bit and 32-bit), Microsoft Windows XP (64-bit and 32-bit), Linux-x86 and Linux-x86-64, Intel EM64T and AMD64Product Family : Quadro NVS 300Product Series : QuadroProduct Type : Graphics CardVideo Card Bus Version : 2.0 x16Warranty : Three years.

ION Party Starter, at Maplin
•Ultra-compact speaker delivers BIG wireless sound•Projects pulsating multi-coloured party lights onto walls and ceilings•Streams music wirelessly from any Bluetooth® device•Works with iPad, iPhone, iPod, Android® devices, and more•Long-lasting rechargeable battery (USB charging cable included)Carry the party in your pocket! Party Starter is a powerful full-range speaker with colourful beat-synced lighting that makes any place into a party space. Plus, it’s wireless! Connect wirelessly to Party Starter with any Bluetooth music player or phone, crank up the volume, and let the light show begin.Party Starter works with iPad, iPhone, iPod, Android devices, and more. Don’t let its size fool you—this little wonder packs a BIG sound and an amazing, pulsating, multi-coloured light show. You'll have a great time dancing to your favourite songs with your friends and family. Plus, with its long-lasting rechargeable battery Party Starter provides big-time party fun anywhere.

REAN 1/4 Inch 2 Pole Chassis Jack PCB Mount Switched, at Maplin
•3 Pole horizontal 1/4'' jack•All contacts switched•Chrome ferrule nut •PCB Mounting

Hitachi G13SB3 125mm Mini Angle Grinder 830 Watt 110 Volt, at Maplin
Hitachi 125mm G13 SB3 high powered professional mini grinder with overloading durability due to cooling mechanism, coated armature for high wear resistance and a slide switch with lock-on facility. Standard accessories: depressed centre wheel (125mm), side handle, and a wrench. Specification Input Power: G13SB3: 1300 Watt, G13SB3L: 830 Watt.No Load Speed: G13SB3: 11,000/min, G13SB3L: 10,000/min.Disc Diameter: 125mm, M14 x 2.Weight: 1.9kg. Hitachi G13SB3 125mm Mini Angle Grinder 830 Watt 110 Volt Specification Input Power: 830 Watt.No Load Speed: 10,000/min.Disc Diameter: 125mm, M14 x 2.Weight: 1.9kg.

Atlas DCA75 Pro Semiconductor Analyser and Curve Tracer, at Maplin
•An advanced component analyser with PC interface for data logging•Designed to display the specs of a component to determine it is faulty or within spec•Thousands of parameters are pre-programmed•Can be used stand alone or with the PC to identify pinout of unknown devices•Measure a range of component parameters such as gain, leakages, MOSFET and IGBT threshold•PC software cab show range curve trace, traces can be pasted in to Excel for graphing analysis•Test voltages upto 12Vdc and 15mA, the DCA Pro keeps these low to prevent damage to unknown componentsThe instrument can be used to identify characteristics of unknown components or to check that the characteristics of a selection of components have the expected values. When connected to a PC using the supplied USB cable a range of curve-tracing function can be performed, many predefined and user adjustable graphs are available. The DCA75 Pro supports all of the components in the popular DCA55 but adds many more. Supported components include:Transistors, Silicon and Germanium typesMOSFETS, enhancement mode and depletion mode typesJFETs including normally off SiC typesIGBT, Diodes and Diode networksLEDs and bi-colour LEDs (2 and 3 lead types)Zener diodes with a measurement of up to 12VVoltage regulators (measures regulation voltage, drop-out voltage, quiescent current)

Logitech Z323 2.1 Speaker System Aux 30W, at Maplins
•360-degree sound helps project audio evenly in all directions, so you get a great listening experience throughout the room.•A ported, down-firing subwoofer delivers rich bass that brings music, movies and games to life.•1 dual RCA jack and a 3.5 mm jack make it easy to connect a Logitech Squeezebox™ network music player, gaming console, DVD player or iPod®.•An integrated headphone jack lets you listen in private whenever you want.•30 watts (RMS) of power fill the room with big, bold sound.Transport yourself into your music, movies and games with the Logitech® Speaker System Z323. With 360-degree sound, the Z323 speakers help project audio evenly in all directions, so you get a great listening experience throughout the room. A ported, down-firing subwoofer delivers rich bass that brings music, movies and games to life. A dual RCA jack and a 3.5 mm auxiliary input let you easily connect a Logitech Squeezebox™ network music player, gaming console, DVD player or iPod®. A headphone jack lets you listen privately whenever you want. With 30 watts (RMS) of power, you'll have everything you need to create big, bold sound that puts you in the moment.

2x50V 800VA Toroidal Transformer, at Maplins
•High Quality Open Style Toroidal Transformer•Dual Primary / Secondary Windings•Thermal fuse fitted to each Primary•Very low radiated magnetic field•Supplied with mounting kit•UL Approved800VA Dual Primary (2 x 0-115V) Toroad

Q.Max Sheet Metal Punch 60mm, at Maplins
A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches are sold singly without key, which should be ordered separately. Thread the punch onto the hexagonal screw and then pass the hexagonal screw through the hole. Position the die on top of the die nut and then screw the die nut onto the projecting hexagonal screw until it touches the metal sheet. Use a hexagonal key to turn the hexagonal screw. The screw will pull the punch through the metal and a hole will result. Please note these instructions apply to cutters up to 15 mm in size, for cutters 15 mm and over have a different configuration. Notably they have fewer components, in the larger cutters the thread is in the punch and thus there is no die nut. Size.60.0mm.Key Type. ME. 14mm hexagonal wrench

Maplin HD 7.1 USB Sound Card, at Maplin
•24-bit/192 kHz 7.1 USB audio •Real 7.1 channel outputs and 108 dB SNR •Front RCA stereo outputs, for better performance •With rear surround, side surround, centre and subwoofer output •Standalone microphone input and headphone output, connects to headset easily •Built-in optical input and output, conveniently connects to hi-fi audio devices•Provides line-in to record any analogue audio source •Big wheel for volume control, and push for mute•Compliance with USB audio 2.0 •Powered by USB, no need for an additional extra AC adapter•Dimensions: 80 x 80 x 26 mm•Weight: 108 gUSB 2.0 compliant with 8 HD output channels at up to 24-bit/192 kHz. Includes line-in, standalone microphone input, headphone output, plus two optical connectors for SP-DIF input and output. The range of connectors mean this sound card can be used to connect to almost any hi-fi audio device. The wheel allows for easy volume control, with push to mute function. The 108 dB (SNR) quality allows audiophiles to use it as a portable DAC- upgrade your notebook audio quality anytime and anywhere!

Replacement lamp for SANYO-PLC-XF12L, at Maplin
•Complete projector lamp for the SANYO-PLC-XF12L• Compatible with project manufacturer part code(S)-610-298-3135 / POA-LMP26A• Expected lamp life of 1000 Hours• 440W Lamp Wattage If possible please follow the user manual for your projector model. & nbsp; How to take the lamp out of the projector : & nbsp; 1. Turn the projector off by pressing the Power button 2. Allow the projector to cool down for 30 - 45 minutes 3. Disconnect the projector from the power cable 4. Unscrew the screws on the lamp compartment cover, lift and remove 5. Unscrew the screws on the lamp module 6. Lift up the handle on the lamp and pull the lamp out slowly and carefully & nbsp; How to replace the bulb on the lamp & nbsp; Always use the appropriate tools to uninstall and install the bulb. In most cases you will only require standard screwdriver. & nbsp; Once the old lamp has been removed the new lamp can be installed ; & nbsp; 1. Place the new lamp into the open lamp compartment of the projector 2. Ensure the lamp is in the same position and orientation as the old lamp before it was removed 3. Press the lamp into the projector firmly to ensure the lamp and power connector are seated securely 4. Tighten any fixing screws where present 5. Replace the lamp compartment cover and replace the fixing screws 6. Reset the lamp timer & nbsp; On some projector models there is a need to change a setting on the projector so the projector knows there is a new lamp installed. This is only the case on some models, please refer to your user manual. & nbsp; Important: & nbsp; Do not touch the glass area of the lamp with bare hands. & nbsp; Natural oil from your hands can seriously impact on the performance of the unit or cause the lamp to shatter when it reaches very high temperatures. & nbsp; Use a dry cloth to clean the lamp if it was accidentally touched.

Moonraker Replacement Microphone 6 Pin, at Maplin
•Fitting: 6-pin plug•Compatible with Moonraker Minor, Uniden, Cobra 25 & 29 and Audioline radios •Cord Length: 1m •Size: 10 X 6 X 4cm (excluding lead)•Weight: 95gThis high quality replacement microphone covers most CB radios on the current market.

PC Specialist Cosmos II XM-850 Intel i3 2.60GHz Dual Core 15.6inch Gaming Laptop, at Maplins
•15.6" Full HD LED Widescreen (1920 x 1080) - Sharp, crisp & clear display•Intel Core i3-4110M (2.60GHz) - Enjoy brilliant imagery and a seamless computing experience•8GB HyperX Impact RAM (1600MHz) - Keeping you ahead of the curve and level up your game!•2GB NVIDIA GeForce GTX 850M - Delivering a high-performance gameplay experience•1TB Hard Disk Drive (HDD) - Huge storage space for all your games, videos & photos•Windows 8.1 - Take on the world with the latest operating system from Microsoft•3 Year Manufacturers WarrantyThe Cosmos II XM-850 is one of the latest gaming laptops to come from PC Specialist, the UK’s largest custom PC & Laptop manufacturer. It’s packed full of the latest and greatest hardware so you can immerse yourself in your favourite games straight out of the box. Building its reputation on exceptional value for money, the Cosmos series offer a combination of powerful components to deliver outstanding performance but without the hefty price tag.Powered by a 4th Gen Intel Core i3-4110M processor, the Cosmos II XM-850 enables you to breeze through your daily work, enjoy playing the latest games, or watch the latest movies on its dazzling 15.6 inch matte full HD display (1920 x 1080). The NVIDIA GeForce GTX 850M packs the best of PC gaming with advanced NVIDIA technologies like PhysX™, TXAA™, and GeForce Experience™ to deliver a high-performance gameplay experience. With amazing power efficiency and innovative NVIDIA Battery Boost technology, you can now game unplugged for up to twice as long as previous generations. The stylish laptop also features NVIDIA® Optiums Technology, which switches between the on-board GPU and the NVIDIA® GeForce® GTX 850M Graphics Card automatically for extra performance or increased battery life.The Cosmos II XM-850 comes with 8GB Kingston HyperX Impact 1600MHz RAM alongside a huge 1TB (1,000GB) storage drive, offering plenty of space for your games, photos & movies.Thanks to the perfect blend of features, the Cosmos II XM-850 delivers an amazing experience whether you’re working, playing or relaxing. All PC Specialist Laptops are covered by a 3 Year Standard Warranty package and their award winning UK-based Customer Service Team.

Forgefix Hexagonal Head Bit, at Maplin
•Magnetic nut setter •Suitable for use with timber fixing screws •Speed up applicationThis Forgefix Nut Setter is designed to drive the Timber Fix screw range. 1/4in drive fitted with an 8mm magnetic hex socket. Green anti-corrosion treated. Timber Fixing Screw Hex Bit

Replacement lamp for OPTOMA-EP771, at Maplin
•Complete projector lamp for the OPTOMA-EP771• Compatible with project manufacturer part code(S)-BL-FP200D / DE.3797610.800 / DE.379761080• Expected lamp life of 3000 Hours• 180W Lamp Wattage If possible please follow the user manual for your projector model. & nbsp; How to take the lamp out of the projector : & nbsp; 1. Turn the projector off by pressing the Power button 2. Allow the projector to cool down for 30 - 45 minutes 3. Disconnect the projector from the power cable 4. Unscrew the screws on the lamp compartment cover, lift and remove 5. Unscrew the screws on the lamp module 6. Lift up the handle on the lamp and pull the lamp out slowly and carefully & nbsp; How to replace the bulb on the lamp & nbsp; Always use the appropriate tools to uninstall and install the bulb. In most cases you will only require standard screwdriver. & nbsp; Once the old lamp has been removed the new lamp can be installed ; & nbsp; 1. Place the new lamp into the open lamp compartment of the projector 2. Ensure the lamp is in the same position and orientation as the old lamp before it was removed 3. Press the lamp into the projector firmly to ensure the lamp and power connector are seated securely 4. Tighten any fixing screws where present 5. Replace the lamp compartment cover and replace the fixing screws 6. Reset the lamp timer & nbsp; On some projector models there is a need to change a setting on the projector so the projector knows there is a new lamp installed. This is only the case on some models, please refer to your user manual. & nbsp; Important: & nbsp; Do not touch the glass area of the lamp with bare hands. & nbsp; Natural oil from your hands can seriously impact on the performance of the unit or cause the lamp to shatter when it reaches very high temperatures. & nbsp; Use a dry cloth to clean the lamp if it was accidentally touched.

Morphy Richards Everyday/Equip Red, at Maplins
•1.5 Litre capacity•Cordless design•360 Degree base•Automatic cut off•Push button lid release•Removable limescale filter•Illuminated on/off switch•Rear view water window•3kW Rapid boil•Colour: Red

Swan 2 Slice Rouge Metallic Toaster, at Maplins
•Variable Browning Control•Defrost / Reheat and Cancel buttons•Removable Crumb Tray•High Lift Facility•Non-Slip Feet•Colour: Metallic Red

500GB Freecom Mobile Drive Mg, at Maplin
•Ultra thin mobile hard drive in stylish design, complements the design of your MacBook•Magnesium enclosure: ultra lightweight, high quality, solid and environment friendly material•Connects to the USB port of your MacBook•Ultra-fast data transfers with USB 3.0, compatible with USB 3.0 and USB 2.0 interfaces•Mac HFS+ formatted, immediately ready to be used on your MacBook and 100%•Time Machine® compatible•Power via USB port, no need to carry a bulky power adapter•No cooling fan, ensures quiet operation•Two years manufacturer’s warranty and unlimited free helpdesk supportWhy magnesium?• Solid - Magnesium has the best strength-to-weight ratio of any of the commonly used structural metals, has excellent dimensional stability and is highly impact and dent resistant• Lightweight - Magnesium is the lightest of all the commonly used metals (50 to 60% lighter than aluminium)• Cool - Magnesium has the same characteristics as aluminium - it keeps an enclosure cool, dissipates the heat - no noisy cooling fan required!• Green - Magnesium is an earthly matter. It is produced from sea water, brines and magnesium-bearing minerals, which off er unlimited reserves.The perfect mobile hard drive next to your MacBook!!The Freecom Mobile Drive Mg has been specifically designed as storage expansion for your MacBook.Ready for the futureThe Mobile Drive Mg is equipped with a USB 3.0 interface. USB 3.0 is the successor of USB 2.0 and provides a theoretical transfer speed increase of 10x compared to USB 2.0!Don’t have a computer with USB 3.0 ports yet? Don’t worry - the Mobile Drive Mg is fully downwards compatible with USB 2.0 so you can use it without anyproblem on any computer with a USB 2.0 port.Made from MagnesiumThe enclosure of the Mobile Drive Mg is made from magnesium. Magnesium is a solid, lightweight, cool and environment-friendly material. Combined with the elegant and sleek design, the use of Magnesium has resulted in a perfect match for your MacBook.100% Mac!The Freecom Mobile Drive Mg is Mac HFS+ formatted and can be optimally used with your Mac from the moment you connect it to the USB port of your Mac or MacBook. It is 100% TimeMachine compatible, ideal for making backups of your important data!

LDG Z-100 Antenna Tuner, at Maplin
RF Power: 0.1 to 125 watts SSB, CW and digital modes••Latching relays for ultra low power consumption• •2000 memories sorted by frequency••1.8 to 54 MHz coverage (continuous coverage for MARS)• •Tunes 6 to 800 ohms. (16 to 150 on 6M)• •SO239 in and out connections for dipoles, verticals, beams, G5RV, OCF, Cobra, ect• •7 to 18 Volts DC, 100 mA. 3 ft DC power cable includedLDG's popular Z-100 economy tuner is now the Z-100Plus. Still small and simple to use, the Z-100Plus sports 2000 memories that store both frequency and tuning parameters. It will run on any voltage source from 7 to 18 volts; six AA batteries will run it for a year of normal use. Current draw while tuning is less than 100ma. The Z-100Plus now includes an internal frequency counter so the operating frequency is stored with tuning parameters to make memory tunes a blazingly fast 0.1 seconds; full tunes take an average of only 6 seconds

Teng Deep Impact Socket Hexagon 6 Point 3/4in Drive 38mm, at Maplins
Teng Tools impact sockets are specifically designed for use with power tools and air tools. Manufactured in chrome molybdenum in accordance with GGG-W-6608, these sockets ensure the highest quality. They are size marked for easy identification. These regular 6-point deep impact metric sockets have a 3/4 inch square drive and have a locking pin and retaining ring facility. The TEN940638 Impact Socket has the following specifications: Length: 95mm.Size: 38mm.

Moonraker Tornado Stinger Mobile CB Antenna, at Maplin
•This base loaded open coil whip antenna is a favourite amongst lorry drivers, caravan and Land Rover owners•The antenna is pre-set so no tuning is required•Robust design

Flight Rack Case with 10U Mixer Top (Rack Size 8U Dimensions (mm) 521x538x586), at Maplins
Flight Rack Case with 10U Mixer Top (Rack Size 8U Dimensions (mm) 521x538x586)Flight Rack Case with 10U Mixer Top (Rack Size 8U Dimensions (mm) 521x538x586)A professional mixer / rack flight case. The case has a removable front cover, a rear door for access and a lift off lid accessing 10U of space for flatbed mixers, all released by butterfly catches. The case also has 6U of horizontal rack space with steel rack strip, rubber feet, rack bolts with anti-scratch washers. Manufactured from black laminate finish board with Tough metal ball corners and aluminium edging

FLI Intergrator 6.5 Inch 16.5cm 2 Way 85 Watt Car Speakers, at Maplins
•2- Way FLI 16.5cm Component Speakers with 25mm Tweeter are a serious advance in speaker technology•Eye pleasing aesthetics, minimum distortion and maximum bass are the main characteristics of the FLI Integrator Comps•Electroplated IMPP woofer cone delivers fast articulate bass response and durability•Separate tweeter with multi-position fixings for easy installation and improved sound stage•ABS Gasket adds style and retains the steel mesh grill. The mesh grill provides excellent protection for the woofer cone•Butyl rubber surround delivers improved low frequency response•PEI tweeter and midrange deliver outstanding high frequency response•255 Watts Peak Power•85 Watts RMS•Frequency Response: 50Hz- 20 KHz•Mounting Depth: 57mm•Mounting Diameter 144mmBuilt without compromise, these FLI 2-way components are a serious advance in affordable speaker technology. With eye pleasing aesthetics, minimum distortion and maximum bass the FLI Component speakers cannot be ignored. The specially formed glass fiber cone delivers fast and accurate bass, while the silk domed tweeter produces smooth and enjoyable high level frequencies.

Replacement lamp for EPSON-EMP-TS10, at Maplin
•Complete projector lamp for the EPSON-EMP-TS10• Compatible with project manufacturer part code(S)-ELPLP17 / V13H010L17• Expected lamp life of 3000 Hours• 150W Lamp Wattage If possible please follow the user manual for your projector model. & nbsp; How to take the lamp out of the projector : & nbsp; 1. Turn the projector off by pressing the Power button 2. Allow the projector to cool down for 30 - 45 minutes 3. Disconnect the projector from the power cable 4. Unscrew the screws on the lamp compartment cover, lift and remove 5. Unscrew the screws on the lamp module 6. Lift up the handle on the lamp and pull the lamp out slowly and carefully & nbsp; How to replace the bulb on the lamp & nbsp; Always use the appropriate tools to uninstall and install the bulb. In most cases you will only require standard screwdriver. & nbsp; Once the old lamp has been removed the new lamp can be installed ; & nbsp; 1. Place the new lamp into the open lamp compartment of the projector 2. Ensure the lamp is in the same position and orientation as the old lamp before it was removed 3. Press the lamp into the projector firmly to ensure the lamp and power connector are seated securely 4. Tighten any fixing screws where present 5. Replace the lamp compartment cover and replace the fixing screws 6. Reset the lamp timer & nbsp; On some projector models there is a need to change a setting on the projector so the projector knows there is a new lamp installed. This is only the case on some models, please refer to your user manual. & nbsp; Important: & nbsp; Do not touch the glass area of the lamp with bare hands. & nbsp; Natural oil from your hands can seriously impact on the performance of the unit or cause the lamp to shatter when it reaches very high temperatures. & nbsp; Use a dry cloth to clean the lamp if it was accidentally touched.

Replacement lamp for EPSON-EMP-77C, at Maplin
•Complete projector lamp for the EPSON-EMP-77C• Compatible with project manufacturer part code(S)-ELPLP41 / V13H010L41• Expected lamp life of 2000 Hours• 170W Lamp Wattage If possible please follow the user manual for your projector model. & nbsp; How to take the lamp out of the projector : & nbsp; 1. Turn the projector off by pressing the Power button 2. Allow the projector to cool down for 30 - 45 minutes 3. Disconnect the projector from the power cable 4. Unscrew the screws on the lamp compartment cover, lift and remove 5. Unscrew the screws on the lamp module 6. Lift up the handle on the lamp and pull the lamp out slowly and carefully & nbsp; How to replace the bulb on the lamp & nbsp; Always use the appropriate tools to uninstall and install the bulb. In most cases you will only require standard screwdriver. & nbsp; Once the old lamp has been removed the new lamp can be installed ; & nbsp; 1. Place the new lamp into the open lamp compartment of the projector 2. Ensure the lamp is in the same position and orientation as the old lamp before it was removed 3. Press the lamp into the projector firmly to ensure the lamp and power connector are seated securely 4. Tighten any fixing screws where present 5. Replace the lamp compartment cover and replace the fixing screws 6. Reset the lamp timer & nbsp; On some projector models there is a need to change a setting on the projector so the projector knows there is a new lamp installed. This is only the case on some models, please refer to your user manual. & nbsp; Important: & nbsp; Do not touch the glass area of the lamp with bare hands. & nbsp; Natural oil from your hands can seriously impact on the performance of the unit or cause the lamp to shatter when it reaches very high temperatures. & nbsp; Use a dry cloth to clean the lamp if it was accidentally touched.

Ring Automotive 12v, 34Ah Powerpack with 2.1A USB and 300W Inverter, at Maplin
•Suitable for jump starting 12v vehicles•800amp •2 x 12V DC sockets•Detachable heavy duty booster cables•Battery status indicators•Reverse polarity warning buzzer and indicator•Includes 300w inveter

Ring 230v fluorescent inspection lamp, at Maplin
•Impact resistant polycarbonate and rubber construction.•Replaceable low energy consumption 11w compact fluorescent tube (RIL200) included.•Low heat and glare.•Protected switch.•Swivel hook for ease of positioning.•Approx 5 metres of cable.•3 pin plug.

AKG D8000S Dynamic Handheld Microphone 2000 Ohm, at Maplin
AKG D8000S Dynamic Handheld Microphone 2000 Ohm •On/off switch•Rugged wire mesh cap with internal protective basket•Sturdy die-cast metal body•Complete with stand adapter and storage pouch•Hypercardioid PaternAKG D8000S Dynamic Handheld Microphone 2000 Ohm The AKG D8000S is a hand-held dynamic microphone for lead vocalists. The hyper-cardioid polar pattern design of this AKG microphone eliminates off-axis sounds from the sides and rear, and focuses on the audio input from the performer. With a frequency response range of 70 Hz - 20 kHz, the AKG D 8000 S effectively covers a wide spectrum of audible frequencies. This AKG microphone has a maximum Sound Pressure Level (SPL) of 140/150 dB that indicates the loudest sound the microphone can capture without distortion. Having a rugged construction, this dynamic microphone has been built to endure the rigours of field production.

Twin Core Satellite Cable Kit 25m (Used), at Maplins
•Contains 25 metres of black twin core satellite cable and 4 screw-on type F-connectors•High quality, twin satellite cable, ideal for dual channel satellite systems•Compatible with CT100 connectorsUpgrade or install a new satellite and wiring solution. Add a new LNB to your existing satellite dish and watch a channel while you record another. Can be used with Sky + boxes and the new range of Freesat boxes. Everything comes in the pack that you need. 25m of cable and 4 F-type connectors.

Stanley FatMax Spring Steel Mould Bar 25cm (10in), at Maplin
•Made from spring steel for durability•Non slip grip for extra leverage•Polished bevelled claws for better access•High visibility powder coated •Robust ripping barThis Stanley FatMax bar is made from spring steel for durability, has non-slip grip for extra leverage. The bar has polished bevelled claws for better access. Size 10inThe Stanley Works, originally a bolt and door hardware manufacturing company located in New Britain, Connecticut; was founded in 1843 by Frederick T. Stanley. A few years later, in 1857, Frederick's cousin, Henry Stanley, founded The Stanley Rule and Level Company. In 1920, The Rule and Level Company merged with The Stanley Works and would go on to become its famous Hand Tools Division. From the timeless Classic 199 'Stanley Knife', a design icon of the 20th century, to the new range of 'FatMax' hand tools, innovation and quality are synonymous with the Stanley name. Stanley is the number one brand for tools - demanded for their performance by professionals, enthusiasts and DIYers alike. Stanley in the 21st century is much more than just knives. In addition to the world famous hand tools, the Stanley range now includes paint brushes and rollers, sliding doors, pneumatic fastening solutions and mechanics' tools.

HP CE252A Yellow Laser Toner Cartridge, at Maplin
Get the best results out of your HP priniting system. HP Smart technology and chemically-grown toner formulas in HP colour LaserJet print cartridges work with your printer to deliver accurate, consistent colour and reliable, cost-effective performance. Accurate colour,precise image reproduction and crisp,sharptext every time you print. Chemically-Grown toner and HP Smart printing system technology deliver consistent results and reliable performance throughout the life of the cartridge.High Quality Colour priniting for use in HP Laserjet Enterprise CP3525/CM3530 range of Printers

GW Instek GDS-1102U 100MHz Dual Channel TFT Oscilloscope, at Maplin
•Dual channel 100 MHz scope with PC connectivity•250 MSa/s real-time and 25 GSa/s equivalent-time sampling •5.6" TFT colour LCD screen means clear and sharp resolution•LCD panel reduces the weight and size compared with conventional scopes•4K memory length per channel•Save and recall 15 front panel settings and waveforms•19 auto measurements and auto configure function•PC connectivity including cable and software•Data logging functionThis oscilloscope is ideal for hobbyists, engineers and is perfect for schools or labs where quality, accuracy and performance are key to successful testing. It has a superb easy to read TFT screen with high resolution graphics making subtle changes in signal easy to spot. It has built-in presets designed to get the basic configuration right but has a multitude of variable for precise control.With dual sampling modes, a 4,000 point record length, a real-time sampling rate of 250 MSa/s and an equivalent time sampling rate of 25 GSa/s, the GDS-1052-U Series DSO provides an excellent balance of performance between memory length and sampling speed.

Maplin 20 Part Electronics Tool Kit, at Maplins
•Ideal for electronic courses at schools and colleges as well as for electronic enthusiasts and the DIYer•Includes soldering iron, solder, multimeter & test leads, voltage tester and pliers•Also includes screwdrivers, tweezers , crimping tool, wire stripper & cutter and soldering tool set•Supplied in a zipped carry casePlease note that, under the Offensive Weapons Act 1996, this product cannot be sold to anyone under the age of 18.

Akg - Stereo Closed-back IN-EAR Canal Headphones with Mic, at Maplins
•In-Line microphone and volume control•Best for portable DVD, CD and MP3 players•iPhone compatible•Carrying pouch included with silicon sleeves in three sizes (S, M and L)•Lightweight, comfortable fitThe new K 328 headphones deliver high-output sound with excellent frequency response in a closed-back, ear canal design that naturally blocks out ambient noise. It's true AKG performance from lightweight headphones, comfortable enough for hours of stressfree use.To make sure these earphones are the ultimate in comfort, they are supplied complete with a set of ear adapters in small, medium and large, so you can easily alter the earphones and choose the buds that are the perfect fit for you.Optimised for MP3, iPod, iPhone, CD players and portable gaming systems, if you love crystal clear sound whilst listening to music, then these are the headphones for you.

Zoom H2n Handy Voice Recorder (Used), at Maplin
•Brilliant stereo recording•From seminars to electronic news gathering, interviews and podcasting to musical performances the H2n can effortlessly record it. •Includes five built-in mics - four unique recording modes: Mid-Side (MS) stereo, 90° X/Y stereo, 2-channel and 4-channel surround sound.•Built-in 3D panning function gives full control over the front/rear/left/right balance - create 5.1 recordings!•Records in WAV (16- or 24-bit, up to 96kHz) or MP3 (up to 320kbps and in VBR format)•Compatible with SD or SDHC memory cards (up to 32GB)•Supports the Broadcast Wave Format (BWF) used for broadcasting and other professional applications•Newly designed user interface, critical controls are right at your fingertips and make studio-quality recording a breeze•Data-recovery function protects against unexpected errors or battery outage•Automatically start recording when audio is detected and stop when audio ceases•Auto Gain Control and Low-Cut Filter•Can also function as a USB microphone, letting you record directly to your computer - create a podcasts with ease•Direct monitoring - you can monitor with no latency during recording•Built-in normalising and file splitting functions•Support for plug-in power type external mics, with mic gain adjustment wheel•Tuner & metronome enhance practice sessions•1.8-inch backlit LCD display•20 hours' of continuous operation from 2 x AA batteries•Dimensions (W x D x H): 63.5 x 110 x 32 mm•Weight: 110g (without batteries)Representing a new generation of portable recording, the H2n is Zoom’s most innovative handheld recorder to date. It's packed with groundbreaking features into an ultra-portable device that allows you to record pristine audio anywhere you go. From film and broadcast, to journalism, podcasting, musical performance, song writing and rehearsal, the H2n provides amazing recording quality. No matter the application, the H2n brings the very best in stereo recording to a convenient, user-friendly package that fits in your pocket. Zoom H2n Handy Recorder. The new standard in portable recording.

Replacement lamp for TOSHIBA-46WM48, at Maplins
•Complete projector lamp for the TOSHIBA-46WM48• Compatible with project manufacturer part code(S)-23311083A / LPM-46WM48 / TB25-LMP• Expected lamp life of 2000 Hours• 120W Lamp Wattage If possible please follow the user manual for your projector model. & nbsp; How to take the lamp out of the projector : & nbsp; 1. Turn the projector off by pressing the Power button 2. Allow the projector to cool down for 30 - 45 minutes 3. Disconnect the projector from the power cable 4. Unscrew the screws on the lamp compartment cover, lift and remove 5. Unscrew the screws on the lamp module 6. Lift up the handle on the lamp and pull the lamp out slowly and carefully & nbsp; How to replace the bulb on the lamp & nbsp; Always use the appropriate tools to uninstall and install the bulb. In most cases you will only require standard screwdriver. & nbsp; Once the old lamp has been removed the new lamp can be installed ; & nbsp; 1. Place the new lamp into the open lamp compartment of the projector 2. Ensure the lamp is in the same position and orientation as the old lamp before it was removed 3. Press the lamp into the projector firmly to ensure the lamp and power connector are seated securely 4. Tighten any fixing screws where present 5. Replace the lamp compartment cover and replace the fixing screws 6. Reset the lamp timer & nbsp; On some projector models there is a need to change a setting on the projector so the projector knows there is a new lamp installed. This is only the case on some models, please refer to your user manual. & nbsp; Important: & nbsp; Do not touch the glass area of the lamp with bare hands. & nbsp; Natural oil from your hands can seriously impact on the performance of the unit or cause the lamp to shatter when it reaches very high temperatures. & nbsp; Use a dry cloth to clean the lamp if it was accidentally touched.

Function Generator Kit, at Maplin
•Build your own kit to get you started with electronics•Microcontroller based function generator capable of producing square, sine, sawtooth or triangle waves•Adjustable frequency and wave shape by pressing the buttons on the unit•Attach a speaker of up to 1W to hear your sound wavesHow does this kit work?The function generator kit is designed to produce waveforms from a frequency of 1Hz to 39kHz. By connecting a 12V power supply and pressing the function button you will be able to change the wave type. By pressing the frequency button you will be able to go through the frequency range and listen to the different types of waves at different frequencies.How difficult is this kit to put together?This kit is for beginners due to the less complex nature of the components. It is a great tool for teaching children and the less technically advanced the basics of circuitry. It is advised that children are supervised when handling a soldering iron as these can be hot!

Replacement lamp for PROJECTIONDESIGN-F32 SX+, at Maplin
•Complete projector lamp for the PROJECTIONDESIGN-F32 SX+• Compatible with project manufacturer part code(S)-400-0400-00 / 400-0500-00• Expected lamp life of 2000 Hours• 300W Lamp Wattage If possible please follow the user manual for your projector model. & nbsp; How to take the lamp out of the projector : & nbsp; 1. Turn the projector off by pressing the Power button 2. Allow the projector to cool down for 30 - 45 minutes 3. Disconnect the projector from the power cable 4. Unscrew the screws on the lamp compartment cover, lift and remove 5. Unscrew the screws on the lamp module 6. Lift up the handle on the lamp and pull the lamp out slowly and carefully & nbsp; How to replace the bulb on the lamp & nbsp; Always use the appropriate tools to uninstall and install the bulb. In most cases you will only require standard screwdriver. & nbsp; Once the old lamp has been removed the new lamp can be installed ; & nbsp; 1. Place the new lamp into the open lamp compartment of the projector 2. Ensure the lamp is in the same position and orientation as the old lamp before it was removed 3. Press the lamp into the projector firmly to ensure the lamp and power connector are seated securely 4. Tighten any fixing screws where present 5. Replace the lamp compartment cover and replace the fixing screws 6. Reset the lamp timer & nbsp; On some projector models there is a need to change a setting on the projector so the projector knows there is a new lamp installed. This is only the case on some models, please refer to your user manual. & nbsp; Important: & nbsp; Do not touch the glass area of the lamp with bare hands. & nbsp; Natural oil from your hands can seriously impact on the performance of the unit or cause the lamp to shatter when it reaches very high temperatures. & nbsp; Use a dry cloth to clean the lamp if it was accidentally touched.

RGB Flexible Tape Controller and 44 Key Hand-held Infra-red Controller, at Maplin
RGB Flexible Tape Controller and 44 Key Hand-held Infra-red Controller•Ideal for Professional/Commercial or Domestic use•Total Control over Brightness, Speed and Colour•Quick Set-up with 15 Pre-set Colours plus White•With 4 Colour Changing Modes: Flash, Strobe, Fade, Smooth•For use with 5 m NJD RGB LED Super Flexible Tape (NJ961)RGB Flexible Tape Controller and 44 Key Hand-held Infra-red ControllerThe 44 key infra-red, hand-held RGB Controller and Tape Interface is designed for use with NJD 5 m RGB LED Super Flexible Tape (NJ961). The Controller requires line of sight for correct use. The 44 key Remote has controls for dimming, speed and colour changing mode, with 15 pre-set colours plus white and adjustable brightness control. Suitable for domestic or commercial use.

Ambersil Acrylic Paint Green 400ml, at Maplin
•Vibrant acrylic paint for the repair and touch-up of painted surfaces •Colour matched protective coatings •RAL matched for accurate colour matches •Fast drying

Logitech G600 MMO USB Gaming Mouse, at Maplin
•12 thumb buttons & a clickable scroll wheel that tilts•Fully-customisable RGB illuminated thumb panel•Unique design based on massive testing with hardcore MMO gamers•3 on board gaming profiles•High-precision laser tracking up to 8200 DPIWith 20 buttons, the Logitech G600 MMO Gaming Mouse is a customisable and easy-to-use mouse, specifically designed for mastering your favourite MMOs. Whether you're out to burn down the boss or are in the heat of a PVP battle, this mouse gives you power to execute every action with lightning-fast accuracy.20 MMO-tuned ButtonsPut every action at your fingertips with three primary buttons, 12 thumb buttons, a clickable scroll wheel that tilts, plus DPI and profile switching. All pre-configured for optimal MMO use right out of the box -- no drivers required.Light it up Your WayFully-customisable RGB illuminated thumb panel with more than 16-million possible colour combinations.Set colours to pulse on and off or configure them to continuously change. Assign a different colour to each profile to see your settings at a glance.Intuitive Thumb PanelUnique design based on massive testing with hardcore MMO gamers.No misclick worries -- 2 distinct sets of 6 buttons naturally guide your thumb to just the right spot.A full array of MMO action buttons gives you quick and easy no-look navigation. Comfortably Shaped to Go the DistanceSculpted to support your hand through hours of raiding, PVP, or just grinding XP.Every button is tuned to reduce click fatigue without accidental actuations.G-Shift and DPI ShiftActivate G-shift with the ring-finger button to instantly double the number of actions you can perform with every button.Assign a DPI shift button to toggle between your current DPI level and a pre-determined DPI level -- great for sniping.Set up to 5 DPI levels per profile.Total Personalisation Three onboard memory profiles—access all your button, tracking and lighting colour settings on any computer with no software required.Use the default settings or easily tweak them to perfection -- download optional Logitech Gaming Software to access even more intricate macro and scripting capabilities.* Some profile settings require Logitech Gaming Software to be enabled and are not supported on Linux and earlier Windows-based operating systems. Gaming-Grade PerformanceHigh-precision laser tracking up to 8,200 dpi.Built to last -- primary buttons rated to 20-million clicks each.Ultra-durable braided USB cable.TrackingResolution: 50-8,200 dots per inch (dpi) Image processing: 11.25 megapixels/second Max. acceleration: 25G1 Max. speed: up to 160 inches (4.06 meters)/second DurabilityButtons (Left / Right / Third): 20 million clicks Feet: 250 kilometers GlideDynamic coefficient of friction – Mu (k): 0.09** Static coefficient of friction – Mu (s): 0.14** Tuning weight: 133 grams ResponsivenessUSB data format: 16 bits/axis USB report rate: Up to 1000 reports/second Sleep mode: Disabled MeasurementsWeight: 133 grams (without cable) Dimensions: 118mm x 75mm x 41mm Cable length: 6.5 feet (2 meters)

Blue - 2.5mx7m Casablanca Carpet, at Maplin
•An Ideal ground covering for any caravan awning, motor home. Or tent•Ideal for picnics• Eco-FriendlyThis Eco Friendly Groundsheet comes with four corner pegging points, is soft underfoot yet incredibly robust and hard wearing. There is a sleek patterned design and this ground sheet is very easy to clean.

Zoomer Zuppy Kitty, at Maplin
•Zoomer™ Kitty is the PURRfect friend! She’s the sweetest interactive kitty who loves to play, pounce and purr•Zoomer™ Kitty has touch sensors in her head, ears and cheeks•Pet her gently and you’ll feel her really purr•Discover Cuddle Mode, Pounce Mode and more•She sings, dances, performs secret tricks and loves to play with and follow her interactive Kitty Toy•Zoomer™ Kitty is made for kids 5+ and charges via USB•USB cable included. Wall adapter sold separately.Bring home your PURRfect friend with Zoomer™ Kitty! She’s the sweetest interactive Kitty who loves to play, pounce and purr! Using True Vision Technology, she follows and reponds to your movements. As you play, her eyes will change colour letting you know exactly how she’s feeling. Zoomer™ Kitty has touch sensors in her head, ears, and cheeks and she loves it when you stroke her, she’ll even respond with affectionate purrs that you can actually feel! Don’t forget to give her attention or she will wander off and go on her own adventures. Zoomer™ Kitty is curious, cuddly and loves to perform tricks. Discover cuddle mode, pounce mode and more! Adopt the kitty that’s full of life, your PURRfect interactive friend! Charges via USB cable (included). For ages 5 years and over.

6/12v 15 Amp Metal Case Automatic Battery Charger with a 100 Amp Jump Starter, at Maplin
•With intelligent charge control, batteries can be connected for long periods, the charger checks the charging rate and maintains an optimum level for the battery•Suitable for lead acid batteries only For use with Car, Motorcycle and Lawn mower Batteries• Portable and robust metal battery chargers with LED’s & ammeters to show current charging levels, double insulated and protected against thermal overload and reverse battery connectionThis product provides a 2 Amp (RMS) Trickle charge, A 15 Amp (RMS) Fast charge and 100 Amp (RMS) Engine Jump Start. There is an automatic intelligent charge circuit along with a Ammeter & LED Warning Display. Both Reverse Polarity Protection and Short Circuit Protection is provide, along with Over-Load Protection.

Maplin Electrical is one of the UK's leading Electrical retailers, offering the most competitive choice of mainly branded, quality products at consistently the lowest prices in the local market. The core range of Maplin products include TV, video, audio, Cooking, MDA, Small domestic appliances, Communications, Multimedia, Electronics and New technology accessories. Maplin Stores are unrelated to the Dixons Stores Group - which includes Dixons, Currys, PC World and The Link.