Maplin UK is the UK's largest electrical retailer, providing an extensive range of TVs, hi-fi's, cookers, fridges, washing machines, televisions, microwaves and vacuum cleaners. Maplin also sell a wide selection of PCs and communications products. Maplin Electricals superstores showcase the latest products to meet every household electrical need, the online store offers a comprehensive range with digital TV, VCR, DVD, camera and camcorder areas.

Breville Polished S/S Jug Kettle, at Maplins
•1.5 Litre capacity•Cordless design•360 Degree base•Automatic cut off•Concealed heating element•Rear water gauge for accurate filling•Blue illuminated switch•Non-slip feet•Cord storage•3kW1.5 litre polished stainless steel jug kettle with cord storage and non-slip feet offers quality and value along with style and eco-friendly design

Blade Chroma Landing Gear Set, at Maplins
•Replacement set of landing legs for the Chroma drone range•Light and rigid design ensures that not too much weight is added to the drone•Easy slide in installationWhat is this landing gear set used for?This is a replacement landing gear set for the Chroma drone range. The light and rigid landing legs makes sure that the rest of the Chroma’s body is intact when you are landing. The landing legs simply need to be slid into the bottom of the drone until they lock in position, making them very easy to replace/install.

Maplin Triple Phono Composite Video Extension Cable 10m, at Maplin
• Ideal for use with Televisions, HDTV surround sound systems, freeview/freesat boxes and DVD players.• 2 pole Phono terminals with positive and ground contacts• Gold-plated connectors• Durable and highly flexible outer jacket• 5 Year WarrantyTriple Phono is also known as an RCA connection and carries a composite video signal alongside two mono audio signals, which are combined in AV equipment for video with stereo sound. Most consumer equipment colour codes yellow as video, red as right audio and white as the left audio channel.It is an AV cable commonly used when connecting standard definition TVs to satellite/cable boxes, Blu-ray/DVD players and games consoles.The Maplin Range – Premium construction and specification, with marketing leading cable technologies.The Maplin Cable range delivers the latest technology first and foremost, ensuring compatibility with the latest hardware standards.Our Maplin cables feature fully wired connectors and shielded cables where required throughout the range, delivering high fidelity audio and video signals across a vast range of connectors and dedicated adapters.The Maplin cable range features hard wearing cable construction, with colour-coded, compact connectors available for almost any use. All Maplin cables are quality assured, with a 5 year warranty across the range.

Krator Neso 4 2.1 USB Speaker 26W, at Maplins
•Enjoy a quality audio performance without compromise.•2-way satellite design with powerful subwoofer amazes you with its superior sound performance and avant-garde design.•The exclusive aligned audio technology "Ultra-USB 2.1ch" applied on N4-21U26 enhances music with power and clarity.•Delivers a dynamic sound performance.•Subwoofer features a 4-inch long-throwing driver which delivers explosive bass.•Plug a 3.5mm audio cable to your MP3, iPod, iPhone and other audio devices.•Built-in Volume, Bass buttons deliver control at your fingertips.Enjoy a quality audio performance without compromise. N4-21U26, is a 2-way satellite design with powerful subwoofer, which amazes you with its superior sound performance and avant-garde design. The exclusive aligned audio technology ""Ultra-USB 2.1 ch"" applied on N4-21U26 enhances the music with power and clarity. The satellites feature a 1-inch Mylar high-frequency driver and 3-inch full-range driver, N4-21U26 delivers a dynamic sound performance. The subwoofer features a 4-inch long-throwing driver which delivers explosive bass.Plug a 3.5mm audio cable to your MP3, iPod, iPhone and other audio devices, transmitting audio into & out the N4-21U26. Built-in Volume, Bass buttons deliver control at your fingertips. A total of 26 watts R.M.S. output provides deep bass and precise sound dispersion. 2-way Satellites offer Crystal High and Enchanting Vocals. A 2-way audio design makes N2-21U26 a perfect sound generator for vocals. The explosive deep bass subwoofer features a 4-inch long-throwing subwoofer firing explosive bass with optimum, full-spectrum audio. Elegant design and Convenient control in your fingertips. N4-21U26 is designed with detachable cables. No worry over entangled wires. Convenient volume and bass controls are right on the side of the speaker too. Power conservation design with the latest technology and USB-power.

Hard Drive Vibration Damper, at Maplin
•Reduce vibration to reduce case noise•Simply attach to a standard 3.5 inch hard drive and install in to a 5.25 inch bay•Silicon rubber construction

ION Deluxe Film 2 SD Slides Holder, at Maplin
•Spare slides holder for the ION Deluxe Film 2 SD Scanner

IRWIN Record J914H Pair of High Tensile Replacement Jaws, at Maplin
IRWIN Record Pair of High Tensile Replacement Jaws for high tensile centre cut bolt cutters jaws specially heat treated for cutting very hard materials up to Brinell 500, (Rockwell C52, 110 tons/square in). IRWIN Record Pair of High Tensile Replacement Jaws replacement centre cut high tensile jaws.Suitable for 914H/BC914H Bolt Cutters.

Satellite Dish Motor, at Maplin
•Compatible with DiSEqC 1.2 communication protocol and USALS technology •Easy to install •Moves the dish automatically when a channel is selected (with compatible receiver)•Powered through the coaxial cable from your receiver•Compatible with all receivers that use the standard DiSEqC 1.2

Replacement lamp for EPSON-EMP-TW620, at Maplin
•Complete projector lamp for the EPSON-EMP-TW620• Compatible with project manufacturer part code(S)-ELPLP35 / V13H010L35• Expected lamp life of 1700 Hours• 170W Lamp Wattage If possible please follow the user manual for your projector model. & nbsp; How to take the lamp out of the projector : & nbsp; 1. Turn the projector off by pressing the Power button 2. Allow the projector to cool down for 30 - 45 minutes 3. Disconnect the projector from the power cable 4. Unscrew the screws on the lamp compartment cover, lift and remove 5. Unscrew the screws on the lamp module 6. Lift up the handle on the lamp and pull the lamp out slowly and carefully & nbsp; How to replace the bulb on the lamp & nbsp; Always use the appropriate tools to uninstall and install the bulb. In most cases you will only require standard screwdriver. & nbsp; Once the old lamp has been removed the new lamp can be installed ; & nbsp; 1. Place the new lamp into the open lamp compartment of the projector 2. Ensure the lamp is in the same position and orientation as the old lamp before it was removed 3. Press the lamp into the projector firmly to ensure the lamp and power connector are seated securely 4. Tighten any fixing screws where present 5. Replace the lamp compartment cover and replace the fixing screws 6. Reset the lamp timer & nbsp; On some projector models there is a need to change a setting on the projector so the projector knows there is a new lamp installed. This is only the case on some models, please refer to your user manual. & nbsp; Important: & nbsp; Do not touch the glass area of the lamp with bare hands. & nbsp; Natural oil from your hands can seriously impact on the performance of the unit or cause the lamp to shatter when it reaches very high temperatures. & nbsp; Use a dry cloth to clean the lamp if it was accidentally touched.

Sennheiser CX5.00 i Earphones White, at Maplin
•Closed acoustic system provides great background noise isolation•Great quality sound, with added bass response•Angled earpiece design for superior comfort•Integrated three button remote for convenience•Inline microphone, tuned for clarity•Selection of four different sized ear adapters for a secure and custom fit•Tangle-free cable, due to the elliptical shape•2 year warrantyWhat do these headphones sound like?This set of headphones delivers a Sennheiser-typical sound. Sonically balanced with pronounced yet not overbearing bass, these headphones are a joy to listen to, especially on the move. Their lightweight design means they’re great for listening to music whilst you’re travelling.The closed-back design of the earpieces helps provide great background noise isolation. Blocking outside noise, this allows you to fully immerse yourself in your music without unwanted distracting sounds.What other features do they have?Featured on the cable is an iOS compatible three button remote and microphone. This enables you to easily swap between music and taking or making calls with ease, so you can stay focused on what matters most to you. The elliptical cable helps prevent tangling, a common bore of the morning commute, while also extends the lifespan of the product by keeping the cable from becoming tight due to knots.What devices are compatible with them?Thanks to the standard 3.5mm jack connection, this headset can connect to a plethora of everyday devices. Whether you want to listen to your smartphone, tablet, computer or MP3 player you’ll be able to connect easily.

Jettec Compatible HP364 (CB316EE) Black Ink Cartridge, at Maplins
•High quality remanufactured HP ink cartridge•Direct replacement for official HP364/CB316EE Black ink cartridge•High quality ink•Superb value for moneyCompatible with the following printer from HP -Photosmart B8550 Photo, D5460, D5463, D5468, Photosmart AIO B010a, B109 series, B110 series, C5300 series, C6300 series, e-Station C510a, Photosmart e-AIO 7510, C310a, Photosmart Plus AIO B209 series, B210 series, Photosmart Premium AIO C309 series, e-C410b

Russell Hobbs Illuminated Jug Kettle, at Maplins
•1.7 Litre capacity•Cordless design•360 Degree base•Automatic cut off•Push button lid•Concealed heating element•Removable washable filter•Rear water window•Brushed stainless steel trim•3kW Rapid boil

Aventador Ride-on Spare Steering Wheel, at Maplins
•Steering Wheel for Aventador Ride-on (Maplin Code: N88QT)

Hammond Watertight IP65 ABS Enclosure Series RP1135 Grey/Grey 125x85x55mm, at Maplin
• Watertight plastic enclosure designed to meet IP65 standard• Ideally suited for mounting printed circuit boards or DIN rail mounted components• Moulded in light grey, general purpose ABS plasticWatertight ABS plastic enclosure designed to meet IP65. Ideally suited for mounting printed circuit boards or DIN rail mounted components. Material carries a UL flammability rating of UL94HB. Gasketed lid with two-piece "tongue and groove" construction provides protection against access of oil, dust and water. Lid includes smooth recessed area for membrane, label or silkscreen and is secured with self-captivating M3.5 stainless steel machine screws (included), threaded into integral stainless steel bushes.

52x Speed CD R 1 Pack, at Maplins
•80 minute blank CD-R•700MB storage ideal for data, music or video•Supplied in a jewel case

USB DC GPS Cable USB A to DC Plug, at Maplins
• USB A to DC plug cable to support A70JC

Replacement lamp for INFOCUS-IN2104EP, at Maplins
•Complete projector lamp for the INFOCUS-IN2104EP• Compatible with project manufacturer part code(S)-SP-LAMP-039• Expected lamp life of 2500 Hours• 200W Lamp Wattage If possible please follow the user manual for your projector model. & nbsp; How to take the lamp out of the projector : & nbsp; 1. Turn the projector off by pressing the Power button 2. Allow the projector to cool down for 30 - 45 minutes 3. Disconnect the projector from the power cable 4. Unscrew the screws on the lamp compartment cover, lift and remove 5. Unscrew the screws on the lamp module 6. Lift up the handle on the lamp and pull the lamp out slowly and carefully & nbsp; How to replace the bulb on the lamp & nbsp; Always use the appropriate tools to uninstall and install the bulb. In most cases you will only require standard screwdriver. & nbsp; Once the old lamp has been removed the new lamp can be installed ; & nbsp; 1. Place the new lamp into the open lamp compartment of the projector 2. Ensure the lamp is in the same position and orientation as the old lamp before it was removed 3. Press the lamp into the projector firmly to ensure the lamp and power connector are seated securely 4. Tighten any fixing screws where present 5. Replace the lamp compartment cover and replace the fixing screws 6. Reset the lamp timer & nbsp; On some projector models there is a need to change a setting on the projector so the projector knows there is a new lamp installed. This is only the case on some models, please refer to your user manual. & nbsp; Important: & nbsp; Do not touch the glass area of the lamp with bare hands. & nbsp; Natural oil from your hands can seriously impact on the performance of the unit or cause the lamp to shatter when it reaches very high temperatures. & nbsp; Use a dry cloth to clean the lamp if it was accidentally touched.

Breville Rio Sunset 4 Slice Toaster, at Maplins
•Variable browning control•Variable width bread slots for thick and thin slices•Defrost / Reheat and cancel buttons•Twin removable crumb tray•High lift•Lift and Look feature - check your toast mid-cycle•Red illuminated buttons for easy use•Non-slip feet•Cord storage

2-Power PTH0087A Power tools Battery - Power Tool Battery 7.2V 3.0Ah, at Maplin
Power tools, Power battery for drills, etc•NiMH, Newer type of rechargable•EAN: 5055190127018•Equivalent Part Number: DE9057•Capacity: 3000.0mAh•Voltage: 7.2V7.199999809265137

ProSound VHF Recharge Kit (Used), at Maplins
•Recharging kit for N46QR, and N47QR•6.25hrs charge time•Charge 2 microphones simultaneouslyA rechargeable base supplied with 4 x AA 1.6 NI ZN rechargeable batteries.Compatible with VHF Mic systems N46QR and N47QR.

Metabo KHE 2650 SDS Plus Combination Hammer Drill 3 Mode 850 Watt 110 Volt, at Maplin
Metabo 850 Watt KHE 2650 with SDS Hammer, Rotary only and Chisel function is a heavy-duty combination hammer with variable speed, Metabo S-Automatic torque limiting clutch and Quick Change Chuck system. Has three modes of operation: Hammer Stop, Rotation Stop and Clockwise/Anti-Clockwise Drilling. The KHE 2443 has Variospeed (V) electronics with electronic soft start for precise spot-drilling, a stoppable switch for trouble-free chiselling in continuous operation, the Metabo S-automatic torque limiting clutch and auto-stop carbon brushes. Supplied with: Side handle, Quickly Adjustable Drilling depth guide, Plastic carry case Specification Modes: Hammer Stop, Rotation Stop, Clockwise/Anti-Clockwise Drilling.Input Power: 850 Watt.No Load Speed: 0-930/min.Impact Rate: 0-4,300/bpm 2.3 Joules.Capacity: Concrete: 26mm, Steel: 13mm, Wood: 28mm, Core: 68mm.Torque: 13Nm.Collar Diameter: 50mm.Weight (without power cable): 3.2kg. Metabo KHE 2650 SDS Plus Combination Hammer Drill 850 Watt 3 Mode 110 Volt Version.

Pifco 7.2v Rechargeable Handheld, at Maplins
•Rechargeable handheld vac•7.2v 1200maH mains rechargeable•Portable cordless operation•Removable permanent filter•Easily emptied dust compartment•Crevice tool included•Red LED charging indicator•Includes safety-approved charger

SPST Illuminated Toggle Switch Red, at Maplin
•SPST toggle switch where the toggle is illuminated when in the ‘on’ position•Rated 20A @ DC 12 V

Kenwood KDC-DAB4551U DAB CD MP3 iPod Headunit, at Maplin
•MP3, WMA, AAC playback•DAB / DAB+ tuner built-in•Illuminated front AUX and USB terminal with slide protection cover•iPod / iPhone direct control terminals•Original steering wheel remote control interface terminal•RDS with radio textKenwood’s new in-car CD/iPod Control system now includes state-of-the-art DAB/DAB+. Using the latest digital chip set means for the first time listening to digital radio on the move is free of annoying breaks and distortion. Clever technology will even switch from DAB to FM (and back again) if there is a local signal problem. Kenwood's DAB-A1 DAB aerial is required with this product. This is a discrete window film aerial avoiding the need to drill a hole in the vehicles body as previously required with less sensitive receivers.

650mAh RCR123A Li-ion battery (NL166), at Maplin
•650mAh 3.7V 2.4Wh•More than 500 charge-discharge cycles.•Internationally insured by Ping An Insurance(Group) Company of China, LtdRCR123A Li-ion Rechargeable Battery650mAh 3.7V 2.4WhIntegrated battery overcharge / discharge protection circuitsHigh discharge performance Li-ion Rechargeable Battery

Earlex LCS270 Pro Steam Wallpaper Stripper 230 Volt, at Maplins
This Earlex LCS Pro Steam Wallpaper Stripper is a compact lightweight professional wallpaper stripper. That is ideal for the professional painter and decorator. It has two thermal protection devices and a pressure release valve. Ideal for multi-layered wallpapers, vinyls and painted wallpaper. LCS270 Input Power: 2,750 Watt. LCS176 Input Power: 1,760 Watt.Tank: 7.5 litre. Running Time: 90 min/ 180 mins.Hose Length: 5m run cool anti-kink.Plate Size: 330 x 250mm. Running time: 180 mins.Power Input: 2,750 Watt. Voltage: 230 Volt.

Optoma 3D Glasses (DLP-Link), at Maplin
•Built-in Rechargeable battery•Stylish, lightweight foldable design•Flicker-free 3D with 120Hz DLP LinkTM operation•One size for all - fits over prescription glasses•HD resolution to both eyes using active 3D technologyUsing the inherent speed of DLP technology, Optoma 3D Ready projectors can output video and images at an astonishing rate of 120Hz, allowing you to show full screen, full colour, stereoscopic 3D. The 3D effect is generated by splitting this signal into two standard video streams, one for each eye. Using DLP® Link™ technology, the 3D glasses synchronise with the image on screen to filter each stream to the correct eye. Your brain then combines the two streams to make them jump into life.The 3D features of Optoma projectors can only be used with compatible 3D content. Typical applications include use with 3D educational or 3D design and modelling systems. Support for 3D TV broadcast systems, (SKY in the UK), Blu-ray 3D™ and 3D games from the Sony® PS3 or Microsoft® Xbox 360 will only work on an Optoma Full 3D projector. See website for updates.

Brother P Touch PT1005BTS Labelling Machine with 2 Free Tapes, at Maplin
•Slim, hand-held machine•Ideal for printing high quality labels•Ideal for home, office, cables, garage and lots more!•Supplied with 2 free tapes•ABCD style keyboard•12 character 1 line LCD display•Text preview function•9 print styles/ 5 print sizes/ 5 border styles•10mm/second print speed•Built-in time and date clock•Built-in tape cutter•Utilises 4 tape widths: 3.5mm, 6mm, 9mm and 12mm TZ tape•Requires 6 x AAA batteries (included)The PT-1005BTS slim-line, hand-held labelling machine is ideal for managing your office, videos, storage, cables, equipment or just about anything. You can create labels for any application. Select from the many frames, character sizes and styles to deign custom labels, In addition, the variety of tape cartridges available (sold separately), allow you to print labels with different widths and exiting colours. This handy little machine can be used mobile or using a mains adapter. Includes 6 x AAA batteries (Order Code: L42AL x 2, for replacements).Includes free black on white and black on red laminated tapes.

Sennheiser MX270 In Ear Earphones Black, at Maplins
•Powerful, bass-driven stereo sound•Ergonomic design for a superior fit•Hassle-free cable slider•Symmetrical cable for a tangle-free listening experience•Optimised for MP3, iPod, iPhone (iPod and iPhone are trademarks of Apple Inc. registered in the U.S. and other countries) and portable media players•2 year warranty

Timeguard Mechanical Electronic Immersion Heater Time Controller, at Maplins
•Total control of your hot water•Simple to programme•Switches on and off at preset times•Easy to use setting pins•30 minute minimum switching interval, which can be increased in 15 minute steps•Integral thermal fuse for extra protection•Timeguard TS900BPlease note: This product is not suitable for discharge lighting (e.g. SON and metal halide).Conforms to directives 72/23/EEC and 89/336/EEC.

Roughneck T-Shirt Medium Mixed Colours Triple Pack, at Maplins
This Roughneck T-Shirt Triple pack contains three assorted, round neck T-Shirts. The T-shirts are made from 160g 100% cotton. The triple pack contains 3 assorted colours: Green, blue and red.Size: Medium (39-41in).

LDG Z-817 Antenna Tuner, at Maplin
RF Power 0.1 to 20 watts SSB, CW and digital modes••Latching relays for ultra low power consumption••Battery operated 4 x 1.5V Alkaline AA (not included)••Built-in CAT port interface. CAT thru port for computer connection••2000 memories when used with FT-817 interface (200 memories for other radios)••1.8 to 54 MHz coverage (continuous coverage for MARS)••Tunes 6 to 600 ohms (about 10:1 SWR range) 16 to 150 on 6M (about 3:1)••SO239 in and out connections for dipoles, verticals, beams, G5RV, OCF, Cobra, etcThe Z-817 is the ultimate autotuner for QRP radios including the Yaesu FT-817(D). The Z-817 interfaces to the CAT port (ACC) on the back of the FT-817 radio with the provided cable. Tuning could not be simpler; one button push on the tuner is all that is needed and the Z-817 takes care of the rest. It will switch to PKT mode, transmit a carrier, tune the tuner, then restore the radio to the previous mode! 2000 memories cover 160 through 6 meters Of course, the Z-817 will also function as a general purpose antenna tuner with other QRP radios. Just transmit a carrier and press the tune button on the tuner. The Z-817 is powered by four AA internal Alkaline batteries (not included), so there are no additional cables required to use the Z-817. Latching relays are used so that power consumption is Zero when not tuning allowing a set of batteries to last about one year

Replacement lamp for PANASONIC-PT-VW430, at Maplin
•Complete projector lamp for the PANASONIC-PT-VW430• Compatible with project manufacturer part code(S)-ET-LAV200• Expected lamp life of 2500 Hours• 280W Lamp Wattage If possible please follow the user manual for your projector model. & nbsp; How to take the lamp out of the projector : & nbsp; 1. Turn the projector off by pressing the Power button 2. Allow the projector to cool down for 30 - 45 minutes 3. Disconnect the projector from the power cable 4. Unscrew the screws on the lamp compartment cover, lift and remove 5. Unscrew the screws on the lamp module 6. Lift up the handle on the lamp and pull the lamp out slowly and carefully & nbsp; How to replace the bulb on the lamp & nbsp; Always use the appropriate tools to uninstall and install the bulb. In most cases you will only require standard screwdriver. & nbsp; Once the old lamp has been removed the new lamp can be installed ; & nbsp; 1. Place the new lamp into the open lamp compartment of the projector 2. Ensure the lamp is in the same position and orientation as the old lamp before it was removed 3. Press the lamp into the projector firmly to ensure the lamp and power connector are seated securely 4. Tighten any fixing screws where present 5. Replace the lamp compartment cover and replace the fixing screws 6. Reset the lamp timer & nbsp; On some projector models there is a need to change a setting on the projector so the projector knows there is a new lamp installed. This is only the case on some models, please refer to your user manual. & nbsp; Important: & nbsp; Do not touch the glass area of the lamp with bare hands. & nbsp; Natural oil from your hands can seriously impact on the performance of the unit or cause the lamp to shatter when it reaches very high temperatures. & nbsp; Use a dry cloth to clean the lamp if it was accidentally touched.

Replacement lamp for PANASONIC-PT-LB60NTE, at Maplins
•Complete projector lamp for the PANASONIC-PT-LB60NTE• Compatible with project manufacturer part code(S)-ET-LAB30• Expected lamp life of 2000 Hours• 220W Lamp Wattage If possible please follow the user manual for your projector model. & nbsp; How to take the lamp out of the projector : & nbsp; 1. Turn the projector off by pressing the Power button 2. Allow the projector to cool down for 30 - 45 minutes 3. Disconnect the projector from the power cable 4. Unscrew the screws on the lamp compartment cover, lift and remove 5. Unscrew the screws on the lamp module 6. Lift up the handle on the lamp and pull the lamp out slowly and carefully & nbsp; How to replace the bulb on the lamp & nbsp; Always use the appropriate tools to uninstall and install the bulb. In most cases you will only require standard screwdriver. & nbsp; Once the old lamp has been removed the new lamp can be installed ; & nbsp; 1. Place the new lamp into the open lamp compartment of the projector 2. Ensure the lamp is in the same position and orientation as the old lamp before it was removed 3. Press the lamp into the projector firmly to ensure the lamp and power connector are seated securely 4. Tighten any fixing screws where present 5. Replace the lamp compartment cover and replace the fixing screws 6. Reset the lamp timer & nbsp; On some projector models there is a need to change a setting on the projector so the projector knows there is a new lamp installed. This is only the case on some models, please refer to your user manual. & nbsp; Important: & nbsp; Do not touch the glass area of the lamp with bare hands. & nbsp; Natural oil from your hands can seriously impact on the performance of the unit or cause the lamp to shatter when it reaches very high temperatures. & nbsp; Use a dry cloth to clean the lamp if it was accidentally touched.

10M DB25 M/M ALL LINES CBL, at Maplin
• Colour: Beige• Length: 10.00 Meter• Warranty: Lifetime• Weight: 0.790 KG•Connectors: DB25 Male to DB25 Male• Connect your printer, modem or other DB25 serial/parallel devices to a switchbox• Fully snagless connectors with thumbscrew provide you with a quick and easy connection every time• All 25 lines wired straight through• Each cable is constructed with snagless connectors and foil shielding for EMI/RFI protectionAll 25 lines are wired straight through pin-to-pin for ease of compatibility. Each cable is foil shielded for EMI/RFI protection, and is available fully snagless with thumbscrew connectors for a fast, easy connection every time.

DEWALT DCF815N XR Subcompact Impact Driver 10.8 Volt Bare Unit, at Maplins
The DEWALT DCF815 XR Subcompact Impact Driver features the new DEWALT Lithium Ion slide battery system. The compact, durable design delivers 107Nm of torque with all metal gearing for efficient power transmission and long tool life. The aluminium front housing provides greater heat dispersion increasing motor life and the Parabolic switch profile allows for greater control over speed. The Driver has a 6.35mm 'drop in' keyless hex driver which allows for quick, one handed fitment. The 3 LED 'Halo' ring provides maximum illumination of the workpiece. The compact body enables operation in confined spaces and repetitive use with minimal fatigue and the ergonomic handle with rubber overmould reduces surface vibration and user fatigue. DCF815D2: 2 x 10.8 Volt 2.0Ah Li-Ion Batteries. DCF815S2: 2 x 10.8 Volt 1.5Ah Li-Ion Batteries. DCF815N: Bare Unit, No Battery or Charger. Specification Bit Holder: 6.35mm (1/4in).No Load Speed: 2,450/min.Impacts Rate: 3,400/bpm.Max Torque: 107Nm.Capacity: Bolt M12. DEWALT DCF815N XR Subcompact Impact Driver Bare Unit 10.8 Volt Bare Unit, No Battery or Charger Supplied.

Replacement lamp for HITACHI-ED-A220NM, at Maplin
•Complete projector lamp for the HITACHI-ED-A220NM• Compatible with project manufacturer part code(S)-DT01181 / DT01251• Expected lamp life of 3000 Hours• 210W Lamp Wattage If possible please follow the user manual for your projector model. & nbsp; How to take the lamp out of the projector : & nbsp; 1. Turn the projector off by pressing the Power button 2. Allow the projector to cool down for 30 - 45 minutes 3. Disconnect the projector from the power cable 4. Unscrew the screws on the lamp compartment cover, lift and remove 5. Unscrew the screws on the lamp module 6. Lift up the handle on the lamp and pull the lamp out slowly and carefully & nbsp; How to replace the bulb on the lamp & nbsp; Always use the appropriate tools to uninstall and install the bulb. In most cases you will only require standard screwdriver. & nbsp; Once the old lamp has been removed the new lamp can be installed ; & nbsp; 1. Place the new lamp into the open lamp compartment of the projector 2. Ensure the lamp is in the same position and orientation as the old lamp before it was removed 3. Press the lamp into the projector firmly to ensure the lamp and power connector are seated securely 4. Tighten any fixing screws where present 5. Replace the lamp compartment cover and replace the fixing screws 6. Reset the lamp timer & nbsp; On some projector models there is a need to change a setting on the projector so the projector knows there is a new lamp installed. This is only the case on some models, please refer to your user manual. & nbsp; Important: & nbsp; Do not touch the glass area of the lamp with bare hands. & nbsp; Natural oil from your hands can seriously impact on the performance of the unit or cause the lamp to shatter when it reaches very high temperatures. & nbsp; Use a dry cloth to clean the lamp if it was accidentally touched.

10µF 25V Tantalum Bead Capacitor, at Maplin
•Resin dipped bead capacitor•Wide operating temperature range -55 to +125°C•High values available in small packageNote: Due to the instability of the price of tantalum, prices are subject to change

2x Speed Blu Ray BD RE 50GB 1 Pack, at Maplin
•Capacity: 50GB•Re recordable•Speed: 2x•Single Jewel CaseThis disc complies with BD-RE Specification Version 2.1.

Sievert Promatic Soft Flame Burner 38mm 11.5kW, at Maplin
The Promatic 38mm 11.5kW Soft Flame Burner used for cable work and heat shrink applications such as the joining of electrical and telecommunications cables. For use with PRMS3366 Handle.

Morphy Richards Accents Polished Black 2 Slice, at Maplin
•Variable browning control•Defrost / Reheat and Cancel buttons•Removable crumb tray•High lift•Illuminated buttons•Non-slip feet•Cord storage•Coated stainless steel body with chrome trims•850W•2 Year guarantee

IDE to SATA or SATA to IDE Adapter, at Maplin
•Use your IDE HDD on a SATA motherboard•Use your SATA HDD on a IDA motherboard

Replacement lamp for MITSUBISHI-LVP-50XHF50, at Maplins
•Complete projector lamp for the MITSUBISHI-LVP-50XHF50• Compatible with project manufacturer part code(S)-S-PH50LA• Expected lamp life of 6000 Hours• Long Life If possible please follow the user manual for your projector model. & nbsp; How to take the lamp out of the projector : & nbsp; 1. Turn the projector off by pressing the Power button 2. Allow the projector to cool down for 30 - 45 minutes 3. Disconnect the projector from the power cable 4. Unscrew the screws on the lamp compartment cover, lift and remove 5. Unscrew the screws on the lamp module 6. Lift up the handle on the lamp and pull the lamp out slowly and carefully & nbsp; How to replace the bulb on the lamp & nbsp; Always use the appropriate tools to uninstall and install the bulb. In most cases you will only require standard screwdriver. & nbsp; Once the old lamp has been removed the new lamp can be installed ; & nbsp; 1. Place the new lamp into the open lamp compartment of the projector 2. Ensure the lamp is in the same position and orientation as the old lamp before it was removed 3. Press the lamp into the projector firmly to ensure the lamp and power connector are seated securely 4. Tighten any fixing screws where present 5. Replace the lamp compartment cover and replace the fixing screws 6. Reset the lamp timer & nbsp; On some projector models there is a need to change a setting on the projector so the projector knows there is a new lamp installed. This is only the case on some models, please refer to your user manual. & nbsp; Important: & nbsp; Do not touch the glass area of the lamp with bare hands. & nbsp; Natural oil from your hands can seriously impact on the performance of the unit or cause the lamp to shatter when it reaches very high temperatures. & nbsp; Use a dry cloth to clean the lamp if it was accidentally touched.

Replacement lamp for BOXLIGHT-MP-56t, at Maplins
•Complete projector lamp for the BOXLIGHT-MP-56t• Compatible with project manufacturer part code(S)-MP56T-930• Expected lamp life of 2000 Hours• 250W Lamp Wattage If possible please follow the user manual for your projector model. & nbsp; How to take the lamp out of the projector : & nbsp; 1. Turn the projector off by pressing the Power button 2. Allow the projector to cool down for 30 - 45 minutes 3. Disconnect the projector from the power cable 4. Unscrew the screws on the lamp compartment cover, lift and remove 5. Unscrew the screws on the lamp module 6. Lift up the handle on the lamp and pull the lamp out slowly and carefully & nbsp; How to replace the bulb on the lamp & nbsp; Always use the appropriate tools to uninstall and install the bulb. In most cases you will only require standard screwdriver. & nbsp; Once the old lamp has been removed the new lamp can be installed ; & nbsp; 1. Place the new lamp into the open lamp compartment of the projector 2. Ensure the lamp is in the same position and orientation as the old lamp before it was removed 3. Press the lamp into the projector firmly to ensure the lamp and power connector are seated securely 4. Tighten any fixing screws where present 5. Replace the lamp compartment cover and replace the fixing screws 6. Reset the lamp timer & nbsp; On some projector models there is a need to change a setting on the projector so the projector knows there is a new lamp installed. This is only the case on some models, please refer to your user manual. & nbsp; Important: & nbsp; Do not touch the glass area of the lamp with bare hands. & nbsp; Natural oil from your hands can seriously impact on the performance of the unit or cause the lamp to shatter when it reaches very high temperatures. & nbsp; Use a dry cloth to clean the lamp if it was accidentally touched.

Hitachi G13SE2 125mm Mini Angle Grinder 1200 Watt 240 Volt, at Maplins
Hitachi 125mm G13SE2 high powered professional mini grinder with coated coil armature which gives superior resistance to dust abrasion. Standard Accessories: Abrasive wheel, Wrench, and Side handle. Specification Input Power: G13SE2 1200 Watt, G13SE2L: 1050 Watt.No Load Speed: G13SE2: 11,000/min, G13SE2L: 10,000/min.Disc Diameter: 125mm, M14 x 2.Weight: 1.9kg. Hitachi G13SE2 125mm Mini Angle Grinder 1200 Watt 240 Volt Specification Input Power: 1200 Watt.No Load Speed: 11,000/min.Disc Diameter: 125mm, M14 x 2.Weight: 1.9kg.

3mm Red LED, at Maplin
A red 3mm LED in water clear finish offering superb clarity different, colours available are red, white, yellow, and blue. The cathode is denoted by the flat on the body and by the short lead.

Replacement lamp for SANYO-PLC-XC50, at Maplins
•Complete projector lamp for the SANYO-PLC-XC50• Compatible with project manufacturer part code(S)-610-339-8600 / POA-LMP127• Expected lamp life of 3000 Hours• 220W Lamp Wattage If possible please follow the user manual for your projector model. & nbsp; How to take the lamp out of the projector : & nbsp; 1. Turn the projector off by pressing the Power button 2. Allow the projector to cool down for 30 - 45 minutes 3. Disconnect the projector from the power cable 4. Unscrew the screws on the lamp compartment cover, lift and remove 5. Unscrew the screws on the lamp module 6. Lift up the handle on the lamp and pull the lamp out slowly and carefully & nbsp; How to replace the bulb on the lamp & nbsp; Always use the appropriate tools to uninstall and install the bulb. In most cases you will only require standard screwdriver. & nbsp; Once the old lamp has been removed the new lamp can be installed ; & nbsp; 1. Place the new lamp into the open lamp compartment of the projector 2. Ensure the lamp is in the same position and orientation as the old lamp before it was removed 3. Press the lamp into the projector firmly to ensure the lamp and power connector are seated securely 4. Tighten any fixing screws where present 5. Replace the lamp compartment cover and replace the fixing screws 6. Reset the lamp timer & nbsp; On some projector models there is a need to change a setting on the projector so the projector knows there is a new lamp installed. This is only the case on some models, please refer to your user manual. & nbsp; Important: & nbsp; Do not touch the glass area of the lamp with bare hands. & nbsp; Natural oil from your hands can seriously impact on the performance of the unit or cause the lamp to shatter when it reaches very high temperatures. & nbsp; Use a dry cloth to clean the lamp if it was accidentally touched.

Brother LC970C Cyan (Yield 300 Pages) Ink Cartridge, at Maplin
Brother LC970C Cyan (Yield 300 Pages) Ink CartridgeOriginal Brother Inkjet Cartridge with a page life of approx 300 pages compatible for DCP 135C/150C/MFC 235C/260C printers

Escape Robot Kit, at Maplin
•Uses three IR diodes to find its way out of a maze!•Six legged self-assembly kit, with a choice of rolling or walking legs•Requires 4 x AAA batteries (not supplied, Order Code: L42AL)•Requires soldering iron, solder wire, long nose pliers, diagonal cutters and small cross-head screwdriver for assembly

PicoScope 2105 25MHz Handheld Scope, at Maplins
•Convert your computer into a powerful oscilloscope•Ergonomically designed wand fits perfectly in your hand•25MHz bandwidth and 14ns rise time•Max single shot sample rate is 100MS/s•Up to 24000 samples buffer memory•Powered by the USB interface••Supplied with the renowned PicoScope PC Oscilloscope and PicoLog data software suites•Tip has built in illumination for probing accuracyThe PicoScope 2105 are portable handheld oscilloscopes that are ideally suited for use by hobbyists, students, technicians, and anyone looking for an easy–to–use and affordable, single–channel PC oscilloscope.Designed for single handed operation, the oscilloscope can be controlled using a button located on the top of the scope. Press the button to start the oscilloscope; the button will flash green to indicate the scope is running.

Buying direct from Maplin saves you money. Maplin cuts amazing deals with manufacturers with the Maplin bulk-buying power and passes on big, big savings to their customers. Maplin customers know they won't find such good deals on Electricals products or such good service at such low prices anywhere else!