Maplin UK is the UK's largest electrical retailer, providing an extensive range of TVs, hi-fi's, cookers, fridges, washing machines, televisions, microwaves and vacuum cleaners. Maplin also sell a wide selection of PCs and communications products. Maplin Electrical superstores showcase the latest products to meet every household electrical need, the online store offers a comprehensive range with digital TV, VCR, DVD, camera and camcorder areas.

Replacement lamp for TOSHIBA-TDP MT400, at Maplins
•Complete projector lamp for the TOSHIBA-TDP MT400• Compatible with project manufacturer part code(S)-TLPLMT20• Expected lamp life of 2000 Hours• 200W Lamp Wattage If possible please follow the user manual for your projector model. & nbsp; How to take the lamp out of the projector : & nbsp; 1. Turn the projector off by pressing the Power button 2. Allow the projector to cool down for 30 - 45 minutes 3. Disconnect the projector from the power cable 4. Unscrew the screws on the lamp compartment cover, lift and remove 5. Unscrew the screws on the lamp module 6. Lift up the handle on the lamp and pull the lamp out slowly and carefully & nbsp; How to replace the bulb on the lamp & nbsp; Always use the appropriate tools to uninstall and install the bulb. In most cases you will only require standard screwdriver. & nbsp; Once the old lamp has been removed the new lamp can be installed ; & nbsp; 1. Place the new lamp into the open lamp compartment of the projector 2. Ensure the lamp is in the same position and orientation as the old lamp before it was removed 3. Press the lamp into the projector firmly to ensure the lamp and power connector are seated securely 4. Tighten any fixing screws where present 5. Replace the lamp compartment cover and replace the fixing screws 6. Reset the lamp timer & nbsp; On some projector models there is a need to change a setting on the projector so the projector knows there is a new lamp installed. This is only the case on some models, please refer to your user manual. & nbsp; Important: & nbsp; Do not touch the glass area of the lamp with bare hands. & nbsp; Natural oil from your hands can seriously impact on the performance of the unit or cause the lamp to shatter when it reaches very high temperatures. & nbsp; Use a dry cloth to clean the lamp if it was accidentally touched.

2 Tonne Steel Towing Bar. Quick Snap on/off use, at Maplin
• Suitable for a car•Better than a tow rope•Solid metal construction.Sold metal construction.

Propel Speedstar 4 Channel 2.4Ghz Helicopter (Used), at Maplin
•Fly to distances of 90 metres with each flight lasting five minutes•Four channel flight controls provide you with greater manoeuvrability•Fly again after a brief break with recharging taking 30 minutes•Enjoy the experience with up to seven other people thanks to the 2.4Ghz channel selection system•Suitable for indoor and outdoor use•Lithium polymer battery included for the helicopter, with the remote controller requiring six AA batteries (not included, e.g. Order Code: L39BF)•Supplied with extra propellers for the main motor module and tail propeller so you can fix any breakages immediatelyHow good is the helicopter?Take to the skies with this helicopter that is great fun for anyone, even if you have very little flying experience. It has a maximum range of 90 metres and each flight lasts for five minutes. You can always continue the fun after a short break, as recharging takes only 30 minutes. Running at a 2.4Ghz frequency, the channel selection system allows you to fly indoors or outdoors with up to seven other pilots, granting you the chance to share the experience and fun with others.Can a beginner use this helicopter?Controlling the helicopter may seem daunting at first, but with the option of choosing between three and four channel flight controls, you get a good platform to learn and experience the fun of radio controlled aircrafts. Three channels give you the ability to move backwards, forwards, left, right, up and down. On the other hand, four channels add the option for you to bank left and right, increasing manoeuvrability so you can perform aerial tricks and aerobatic movements. If you are confident enough you can choose to speed up the helicopter with two speed settings available, increasing the aerial experience you get through faster speeds and greater agility. This makes the helicopter perfect for not only beginners, but for veteran fliers too.

Maplin Screw HDMI Cable 1.5m, at Maplin
• Ideal for use with HDTV, Freeview, Freesat/Sky HD, PS3, PS4, Xbox One, Blu-Ray and any other HDMI device• Suitable for resolutions up to and including 1080p and 4K•Version 2.0 compatible and works with all previous specifications• 3D TV compatible• Gold-plated connectors• Durable and highly flexible outer jacket• 5 Year WarrantyHDMI is a highly versatile cable that combines high definition video and multi-channel audio into one cable. They are commonly used for connecting TVs to set satellite/cable boxes, Blu-ray/DVD players and games consoles. It’s also used in PC connectivity and mobile devices.The Maplin Range – Premium construction and specification, with marketing leading cable technologies.The Maplin Cable range delivers the latest technology first and foremost, ensuring compatibility with the latest hardware standards.Our Maplin cables feature fully wired connectors and shielded cables where required throughout the range, delivering high fidelity audio and video signals across a vast range of connectors and dedicated adapters.The Maplin cable range features hard wearing cable construction, with colour-coded, compact connectors available for almost any use. All Maplin cables are quality assured, with a 5 year warranty across the range.

1 Way Aerial Amplifier, at Maplin
•Amplifies UHF TV and FM radio signals in poor reception areas •Boosts the signal for one TV (or other receiving device)•Compatible with digital, analogue TV signals and DAB / FM radio signals•Small in size but big on performance•20.8dB gain with a noise figure of

Pulse Sensor Amped, at Maplin
•Works with 3V and 5V Arduino•Quickly and easily get reliable pulse readings•No soldering required!•Plug it straight into an Arduino or a Breadboard•It can be hot-glued or epoxied to the back of the sensor to get reading from an ear lobePulse Sensor Amped is a plug-and-play heart-rate sensor for Arduino.It can be used by students, artists, athletes, makers, and game & mobile developers who want to easily incorporate live heart-rate data into their projects.It's quick and easy to get reliable pulse readings. Pulse Sensor Amped works with either a 3Volt and 5Volt Arduino.When the Pulse Sensor Amped is just sitting there, not in contact with any fingers or earlobes or other parts, the analogue signal hovers around the mid-point of the voltage, or V/2. When Pulse Sensor Amped is in close contact with your fingertip or earlobe (or other part) the change in reflected light when blood pumps through your tissues makes the signal fluctuate around that reference point. In the image below the horizontal line is at V/2.Arduino watches the analogue signal from Pulse Sensor, and decides a pulse is found when the signal rises above the mid-point. That's the moment when your capillary tissues gets slammed with a surge of fresh blood. Then, when the signal drops below the mid-point, Arduino sees this and gets ready to find the next pulse. There's also built in hysteresis to the rising and falling thresholds which you can adjust if necessary.

Replacement lamp for INFOCUS-IN38, at Maplin
•Complete projector lamp for the INFOCUS-IN38• Compatible with project manufacturer part code(S)-SP-LAMP-034• Expected lamp life of 2000 Hours• 300W Lamp Wattage If possible please follow the user manual for your projector model. & nbsp; How to take the lamp out of the projector : & nbsp; 1. Turn the projector off by pressing the Power button 2. Allow the projector to cool down for 30 - 45 minutes 3. Disconnect the projector from the power cable 4. Unscrew the screws on the lamp compartment cover, lift and remove 5. Unscrew the screws on the lamp module 6. Lift up the handle on the lamp and pull the lamp out slowly and carefully & nbsp; How to replace the bulb on the lamp & nbsp; Always use the appropriate tools to uninstall and install the bulb. In most cases you will only require standard screwdriver. & nbsp; Once the old lamp has been removed the new lamp can be installed ; & nbsp; 1. Place the new lamp into the open lamp compartment of the projector 2. Ensure the lamp is in the same position and orientation as the old lamp before it was removed 3. Press the lamp into the projector firmly to ensure the lamp and power connector are seated securely 4. Tighten any fixing screws where present 5. Replace the lamp compartment cover and replace the fixing screws 6. Reset the lamp timer & nbsp; On some projector models there is a need to change a setting on the projector so the projector knows there is a new lamp installed. This is only the case on some models, please refer to your user manual. & nbsp; Important: & nbsp; Do not touch the glass area of the lamp with bare hands. & nbsp; Natural oil from your hands can seriously impact on the performance of the unit or cause the lamp to shatter when it reaches very high temperatures. & nbsp; Use a dry cloth to clean the lamp if it was accidentally touched.

Replacement lamp for TOSHIBA-TLP XC2000, at Maplins
•Complete projector lamp for the TOSHIBA-TLP XC2000• Compatible with project manufacturer part code(S)-TLPLW11• Expected lamp life of 2000 Hours• 200W Lamp Wattage If possible please follow the user manual for your projector model. & nbsp; How to take the lamp out of the projector : & nbsp; 1. Turn the projector off by pressing the Power button 2. Allow the projector to cool down for 30 - 45 minutes 3. Disconnect the projector from the power cable 4. Unscrew the screws on the lamp compartment cover, lift and remove 5. Unscrew the screws on the lamp module 6. Lift up the handle on the lamp and pull the lamp out slowly and carefully & nbsp; How to replace the bulb on the lamp & nbsp; Always use the appropriate tools to uninstall and install the bulb. In most cases you will only require standard screwdriver. & nbsp; Once the old lamp has been removed the new lamp can be installed ; & nbsp; 1. Place the new lamp into the open lamp compartment of the projector 2. Ensure the lamp is in the same position and orientation as the old lamp before it was removed 3. Press the lamp into the projector firmly to ensure the lamp and power connector are seated securely 4. Tighten any fixing screws where present 5. Replace the lamp compartment cover and replace the fixing screws 6. Reset the lamp timer & nbsp; On some projector models there is a need to change a setting on the projector so the projector knows there is a new lamp installed. This is only the case on some models, please refer to your user manual. & nbsp; Important: & nbsp; Do not touch the glass area of the lamp with bare hands. & nbsp; Natural oil from your hands can seriously impact on the performance of the unit or cause the lamp to shatter when it reaches very high temperatures. & nbsp; Use a dry cloth to clean the lamp if it was accidentally touched.

Maplin Triple Phono Component Cable 1.5m, at Maplin
• Ideal for use with HDTV, Freeview, Freesat/Sky HD, Nintendo Wii, Wii U, Blu-Ray and any other component-output device• Component video offers enhanced colour reproduction• 2 pole Phono terminals with positive and ground contacts•Gold-plated connectors• Durable and highly flexible outer jacket• 5 Year WarrantyThis Triple Phono Component Cable is also known as a YPbPr cable. Colour information is split over three Phono terminals, offering much richer colour reproduction that a Single Phono composite video signal.It is an AV cable commonly used when connecting TVs to satellite/cable boxes, Blu-ray/DVD players and games consoles.The Maplin Range – Premium construction and specification, with marketing leading cable technologies.The Maplin Cable range delivers the latest technology first and foremost, ensuring compatibility with the latest hardware standards.Our Maplin cables feature fully wired connectors and shielded cables where required throughout the range, delivering high fidelity audio and video signals across a vast range of connectors and dedicated adapters.The Maplin cable range features hard wearing cable construction, with colour-coded, compact connectors available for almost any use. All Maplin cables are quality assured, with a 5 year warranty across the range.

Replacement lamp for SHARP-PG-B10S, at Maplin
•Complete projector lamp for the SHARP-PG-B10S• Compatible with project manufacturer part code(S)-AN-B10LP / BQC-PGB10S//1• Expected lamp life of 2000 Hours• 130W Lamp Wattage If possible please follow the user manual for your projector model. & nbsp; How to take the lamp out of the projector : & nbsp; 1. Turn the projector off by pressing the Power button 2. Allow the projector to cool down for 30 - 45 minutes 3. Disconnect the projector from the power cable 4. Unscrew the screws on the lamp compartment cover, lift and remove 5. Unscrew the screws on the lamp module 6. Lift up the handle on the lamp and pull the lamp out slowly and carefully & nbsp; How to replace the bulb on the lamp & nbsp; Always use the appropriate tools to uninstall and install the bulb. In most cases you will only require standard screwdriver. & nbsp; Once the old lamp has been removed the new lamp can be installed ; & nbsp; 1. Place the new lamp into the open lamp compartment of the projector 2. Ensure the lamp is in the same position and orientation as the old lamp before it was removed 3. Press the lamp into the projector firmly to ensure the lamp and power connector are seated securely 4. Tighten any fixing screws where present 5. Replace the lamp compartment cover and replace the fixing screws 6. Reset the lamp timer & nbsp; On some projector models there is a need to change a setting on the projector so the projector knows there is a new lamp installed. This is only the case on some models, please refer to your user manual. & nbsp; Important: & nbsp; Do not touch the glass area of the lamp with bare hands. & nbsp; Natural oil from your hands can seriously impact on the performance of the unit or cause the lamp to shatter when it reaches very high temperatures. & nbsp; Use a dry cloth to clean the lamp if it was accidentally touched.

RC U5 GYRO Helicopter Replacement Upperdrive, at Maplin
•N01JW Upperdrive

VTX3D Radeon HD7870 2GB 1100MHz GDDR5 2GB Graphics Card, at Maplins
•DirectX 11 evoloved HDMI 1.4 Support•AMD HD3D Technology Support•28nm Process Technology•PCI Express 3.0•HDMI 1.4 Support

Replacement lamp for PROJECTIONDESIGN-F35 WQXGA, at Maplin
•Complete projector lamp for the PROJECTIONDESIGN-F35 WQXGA• Compatible with project manufacturer part code(S)-400-0400-00 / 400-0500-00• Expected lamp life of 2000 Hours• 300W Lamp Wattage If possible please follow the user manual for your projector model. & nbsp; How to take the lamp out of the projector : & nbsp; 1. Turn the projector off by pressing the Power button 2. Allow the projector to cool down for 30 - 45 minutes 3. Disconnect the projector from the power cable 4. Unscrew the screws on the lamp compartment cover, lift and remove 5. Unscrew the screws on the lamp module 6. Lift up the handle on the lamp and pull the lamp out slowly and carefully & nbsp; How to replace the bulb on the lamp & nbsp; Always use the appropriate tools to uninstall and install the bulb. In most cases you will only require standard screwdriver. & nbsp; Once the old lamp has been removed the new lamp can be installed ; & nbsp; 1. Place the new lamp into the open lamp compartment of the projector 2. Ensure the lamp is in the same position and orientation as the old lamp before it was removed 3. Press the lamp into the projector firmly to ensure the lamp and power connector are seated securely 4. Tighten any fixing screws where present 5. Replace the lamp compartment cover and replace the fixing screws 6. Reset the lamp timer & nbsp; On some projector models there is a need to change a setting on the projector so the projector knows there is a new lamp installed. This is only the case on some models, please refer to your user manual. & nbsp; Important: & nbsp; Do not touch the glass area of the lamp with bare hands. & nbsp; Natural oil from your hands can seriously impact on the performance of the unit or cause the lamp to shatter when it reaches very high temperatures. & nbsp; Use a dry cloth to clean the lamp if it was accidentally touched.

2-Power DBI9964A Camera Battery - Digital Camera Battery 7.4V 1100mAh, at Maplin
Camera, Power battery for cameras•Lithium ion, Newer type of rechargable, giving best performance for a rechargable.•EAN: 5055190134498•Equivalent Part Number: BLS-5•Capacity: 1100.0mAh•Voltage: 7.4V7.400000095367432

Targus Versus Tablet Cleaning Kit 2x Cleaning Spray and MicroFibre Cloth, at Maplin
•Cleans and shines your tablet, Smartphone or screen•Removes fingerprints and smudges•Safe to use on all your gadgets•Comes with 2 cleaning sprays and a microfiber cloth

Herald Red Electric Guitar Kit with Built-In Speaker, at Maplins
•A guitar that is ideal for practice with no amp required•Pre-strung with 30" guitar•Solid contoured body•Maple neck & fingerboard•Adjustable bridge•Single-coil pickup•Volume control•3.5mm jack socket for headphones•Speaker on/off switch with LED•Chrome machineheads w/plastic

Tent Light Remote Control, at Maplins
•Enables remote switching of tent light•For use with 27LED (Order Code: N50DN) and 90LED (Order Code: N49DN) tent lights•3 metre range•Works through tent fabric•Key ring remote fob

Adafruit Mini 8x8 LED Matrix with I2C Backpack - Blue, at Maplins
•64 ultra bright blue LEDs packed into a fantastically tiny 20 mm matrix•Header pins allow this breakout to be attached to any breadboard for easy wiring•Only uses 4 pins and is controlled using I2C•Up to four can be linked together•Requires 5 V power •Requires some light soldering•Has mounting holes, great for permanent fixturesWhat is the Adafruit Mini 20 mm 8x8 LED Matrix with I2C Backpack (blue)?The Adafruit Mini 8x8 LED I2C Matrix offers an easy solution to the complex problem of handling a large range of LEDs individually and is a great way to display anything from images, to scrolling text. It can even be used to make a Pong game using an Arduino development board. This Breakout board supplies you with 64 ultra bright blue LEDs.A matrix is an assortment of a large number of LEDs which have been connected in such a way you can power a single LED, or a range of LEDs by powering certain points. In the case of an 8x8, it is expected 16 pins will be used.This matrix has a supplied backpack which uses a method called multiplexing. Instead of using eight positive connections, and eight negative connections, a driver chip controls all 16 pins, while communicating to your development board using only four pins: positive, negative, data, and clock.Convenient screw holes in the PCB make mounting this breakout into your project easy. How to get the most out of your project?The matrix itself is only 20 mm x 20 mm, meaning your small projects can stay small. The header pins allow for quick and easy attachment to a breadboard allowing for all your prototyping and testing needs without messy wires. The header pins do not come attached, enabling you to attach wires instead - this is great for more permanent application. Ultra bright LEDs may come across as a bit too bright, which is why there is a 16 step dim function available for the LEDs. Get this project up and running using only four pins, in comparison to using similar matrices consisting of 16 connecting pins. Adafruit have provided details as to how to Prepare and Use this matrix, they have also generated a Dedicated Library to ensure maximum control over your LEDs.

Sphero Turbo Cover Red, at Maplins
•Protect your Sphero from all the elements•Give your Sphero great traction on all types of terrainThe Turbo cover will be protected from scratches and scuffs whilst giving your Sphero great traction. Compatible will all Sphero versions.

Stanley Tools 3-in-1 Mobile Work Centre, at Maplin
Stanley 3-in-1 Mobile Work Centre has a detachable toolbox unit with small parts storage on top and a detachable mid-section for small parts and accessories. The bottom bin has large 7 inch wheels and the pull handle on top allows for easy convenient manoeuvrability. Large metal latches connecting the units, providing extra security whilst in transport. The 3-In-1 Mobile Work Has huge storage volume for power tools, hand tools small parts and accessories. Dimensions: 475 x 284 x 630mm.

Replacement lamp for SONY-VPL PX10, at Maplin
•Complete projector lamp for the SONY-VPL PX10• Compatible with project manufacturer part code(S)-LMP-P202• Expected lamp life of 1500 Hours• 200W Lamp Wattage If possible please follow the user manual for your projector model. & nbsp; How to take the lamp out of the projector : & nbsp; 1. Turn the projector off by pressing the Power button 2. Allow the projector to cool down for 30 - 45 minutes 3. Disconnect the projector from the power cable 4. Unscrew the screws on the lamp compartment cover, lift and remove 5. Unscrew the screws on the lamp module 6. Lift up the handle on the lamp and pull the lamp out slowly and carefully & nbsp; How to replace the bulb on the lamp & nbsp; Always use the appropriate tools to uninstall and install the bulb. In most cases you will only require standard screwdriver. & nbsp; Once the old lamp has been removed the new lamp can be installed ; & nbsp; 1. Place the new lamp into the open lamp compartment of the projector 2. Ensure the lamp is in the same position and orientation as the old lamp before it was removed 3. Press the lamp into the projector firmly to ensure the lamp and power connector are seated securely 4. Tighten any fixing screws where present 5. Replace the lamp compartment cover and replace the fixing screws 6. Reset the lamp timer & nbsp; On some projector models there is a need to change a setting on the projector so the projector knows there is a new lamp installed. This is only the case on some models, please refer to your user manual. & nbsp; Important: & nbsp; Do not touch the glass area of the lamp with bare hands. & nbsp; Natural oil from your hands can seriously impact on the performance of the unit or cause the lamp to shatter when it reaches very high temperatures. & nbsp; Use a dry cloth to clean the lamp if it was accidentally touched.

Swann 1080p 2TB 4 Channel NVR Kit with 4 Bullet Cameras, at Maplin
•Swann’s latest network video recording security system with 1080P high definition live viewing & playback in real-time (25/30 fps per channel)•Includes 4 x Full HD 1000TVL cameras capable of generating crystal clear 1920 x 1080 pixels (2.1 Megapixel without interpolation) •Each camera has IR filters for powerful night vision to 115ft / 35m & a weather-resistant rating of IP66 for indoor & outdoor use•Set & forget by recording continuously from 4 channels for 32 days+ onto a 2TB hard drive (expandable to 8TB^) or even longer with motion detection•Save time & have peace of mind by easily locating incident video, then transfer to external storage via USB or network•Easy to do-it-yourself as cameras are powered by the NVR & connect via single CAT5E Ethernet cables (included)•Connect the NVR to the internet in minutes using the setup software wizard•Security in the palm of your hand with live viewing on your Smartphone or tablet including iOS & Android devices using the free ‘SwannView NVR’ app, with email notifications if there is activity•View live in HD on your HDTV via HDMI or VGA connection to your LCD screen•Professional surveillance system gives you peace of mind by being able to see the detail you need from longer distances including license plates, faces, clothing colours & more, all in full HDFour 2.1 Megapixel Cameras To See Every DetailFor the ultimate in protection the kit includes 4 all-weather 2.1 megapixel (1920 x 1080 pixels) cameras with night vision up to 115' / 35m. The 4 HD cameras are ideal for monitoring large areas such as yards, driveways and parking lots. They are truly weather proof with an IP66 rating for water resistance and the cables are threaded through their mounting stands for added protection.Defend Your Property and Deter CrimeBe protected and see every detail with the 1080p Full High-Definition Surveillance from Swann. The 1080p NVR is capable of real-time full screen 1080p viewing and recording on all 4 channels (25fps per channel). This allows you to see live and playback full screen video in rich high definition in real-time with video 5 times sharper than most D1 DVRs. Each channel is also independently configurable, so that you can record for longer, and the H.264 video compression allows for fast, efficient recording and playback.Real-time Full HD 1080p ResolutionYou will be amazed by the stunning image quality of Swann's digital 2.1MP 1080p (1920 x 1080 pixels). It’s like comparing the difference between a VHS video tape and a Blu-Ray movie, allowing you to see details and colours like never before. A massive 2TB SATA2 hard drive is pre-installed to allow up to 32 days of continuous recording from all 4 channels or record for even longer with motion triggered recording. If an incident occurs you can transfer video files to back-up media via the easily accessible USB port or save to your network.HDMI Digital High DefinitionThe kit also includes a HDMI cable for generating high definition 1080p video to your flat screen TV including plasmas, LCD, LED TVs or monitors. The NVR also has a VGA connection for viewing on your LCD monitor or compatible TV with PC (VGA) input (VGA cable not included).Power over Ethernet - Both Video & Power in 1 CableInstallation and set up is now easier than ever with Power over Ethernet (PoE) allowing both digital video signal and power to run from the NVR to the cameras through the same cable. Simply run one of the included CAT5E Ethernet cables per camera to the NVR and click it into place the same way you would connecting to your PC or router. Additionally the whole system will use only one power socket for up to 4 NVR cameras – it really is that easy!Getting Started is a BreezeSetting up the NVR for remote viewing has never been easier or faster with Swann’s NVR software wizard guiding you through set-up and makes everyday use easier.Setup Has Never Been So EasyConnecting the DVR to your favourite devices is made even easier with the all new SwannLink technology. Simply connect your DVR to the cameras, download the free Swannview Plus app, and scan the QR code located on your DVR. Then let the app do the work, allowing you to connect your system in seconds to your compatible iOS or Android Device. No more confusing port forwarding or making adjustments to your router settings. It’s as easy as 1, 2, 3.View Your Home on Your PhoneBest of all you can integrate the 1080p Full High-Definition surveillance into your daily life like never before. Once you have installed the NVR and cameras at your home or business, simply download the free SwannView app for your Smartphone or tablet (including iPhone, iPad and Android devices) and see what the cameras see live.Stay Alert At Any TimeTo ensure you know what’s happening at all times configure the NVR to send you email alerts wherever you are, with a JPEG image of any activity attached. That’s peace of mind, all the time.The Swann 1080p Full High-Definition Network Surveillance System with 4 x 2.1 megapixel cameras is professional, affordable and with cutting edge features to allow you to have peace of mind wherever you might be. It is security redefined in 1080p HD.

HP No.940XL (C2N93AE) 4-pack Black/Cyan/Magenta/Yellow Ink Cartridges, at Maplin
• Colour(s) of print cartridges: Black, cyan, magenta, yellow• Page yield (black and white): 2200 pages• Page yield (colour): 1400 pages• Print cartridge volume delivered: 49 ml (black) / 16 ml (cyan, magenta, yellow)HP 940XL 4-pack High Yield Black/Cyan/Magenta/Yellow Ink Cartridges print professional-quality colour documents with sharp black text, at a lower price than laser. Print durable plain paper documents, using pigment inks designed for the office.

2m Six Socket Surge Protected Extension Cable White, at Maplins
•Extend your connectivity and help save the environment •Protect valuable equipment and data from being damaged by electrical surges and spikes•Surge active indicator•2m of 13A cable with fitted plug

Replacement lamp for EPSON-EMP-815, at Maplins
•Complete projector lamp for the EPSON-EMP-815• Compatible with project manufacturer part code(S)-ELPLP14 / V13H010L14• Expected lamp life of 1000 Hours• 150W Lamp Wattage If possible please follow the user manual for your projector model. & nbsp; How to take the lamp out of the projector : & nbsp; 1. Turn the projector off by pressing the Power button 2. Allow the projector to cool down for 30 - 45 minutes 3. Disconnect the projector from the power cable 4. Unscrew the screws on the lamp compartment cover, lift and remove 5. Unscrew the screws on the lamp module 6. Lift up the handle on the lamp and pull the lamp out slowly and carefully & nbsp; How to replace the bulb on the lamp & nbsp; Always use the appropriate tools to uninstall and install the bulb. In most cases you will only require standard screwdriver. & nbsp; Once the old lamp has been removed the new lamp can be installed ; & nbsp; 1. Place the new lamp into the open lamp compartment of the projector 2. Ensure the lamp is in the same position and orientation as the old lamp before it was removed 3. Press the lamp into the projector firmly to ensure the lamp and power connector are seated securely 4. Tighten any fixing screws where present 5. Replace the lamp compartment cover and replace the fixing screws 6. Reset the lamp timer & nbsp; On some projector models there is a need to change a setting on the projector so the projector knows there is a new lamp installed. This is only the case on some models, please refer to your user manual. & nbsp; Important: & nbsp; Do not touch the glass area of the lamp with bare hands. & nbsp; Natural oil from your hands can seriously impact on the performance of the unit or cause the lamp to shatter when it reaches very high temperatures. & nbsp; Use a dry cloth to clean the lamp if it was accidentally touched.

PS2 to PS3 Convertor, at Maplin
•Use your PS2 controller with PS3•4 LED indicators to show controller number•Gamepad, dancemat and steering wheel compatible•Converts mode button to act as a PS home button•Simply plug the PS2 controller into the convertor and then into the PS3.

Replacement lamp for NEC-V260X, at Maplin
•Complete projector lamp for the NEC-V260X• Compatible with project manufacturer part code(S)-NP13LP / 60002853• Expected lamp life of 3500 Hours• 180W Lamp Wattage If possible please follow the user manual for your projector model. & nbsp; How to take the lamp out of the projector : & nbsp; 1. Turn the projector off by pressing the Power button 2. Allow the projector to cool down for 30 - 45 minutes 3. Disconnect the projector from the power cable 4. Unscrew the screws on the lamp compartment cover, lift and remove 5. Unscrew the screws on the lamp module 6. Lift up the handle on the lamp and pull the lamp out slowly and carefully & nbsp; How to replace the bulb on the lamp & nbsp; Always use the appropriate tools to uninstall and install the bulb. In most cases you will only require standard screwdriver. & nbsp; Once the old lamp has been removed the new lamp can be installed ; & nbsp; 1. Place the new lamp into the open lamp compartment of the projector 2. Ensure the lamp is in the same position and orientation as the old lamp before it was removed 3. Press the lamp into the projector firmly to ensure the lamp and power connector are seated securely 4. Tighten any fixing screws where present 5. Replace the lamp compartment cover and replace the fixing screws 6. Reset the lamp timer & nbsp; On some projector models there is a need to change a setting on the projector so the projector knows there is a new lamp installed. This is only the case on some models, please refer to your user manual. & nbsp; Important: & nbsp; Do not touch the glass area of the lamp with bare hands. & nbsp; Natural oil from your hands can seriously impact on the performance of the unit or cause the lamp to shatter when it reaches very high temperatures. & nbsp; Use a dry cloth to clean the lamp if it was accidentally touched.

Memory Foam Back Rest, at Maplin
•Temperature and pressure sensitive foam•Molds to your body for maximum comfort•Helps relieve back discomfort•Adjustable straps for use on most chairsThis back rest provides an ergonomic solution for back problems and is a comfortable support for your back. It has been designed to ease/prevent lower back pain as well as improving general posture. The fabric cover can be washed. The adjustable straps mean that the back rest is suitable for use on most chairs.

Metabo W680 115mm Mini Grinder 4.1/2in 240 Volt, at Maplin
The Metabo W680 Compact mini-grinder uses 115mm (4 1/2in) discs. It has a slim motor housing for ideal handling, a robust and wear-resistant 4-pole motor with a high overload capacity and a die cast aluminium gear housing.Technical Specification: Grinding wheel: 115 mm.Torque: 1,6 Nm.No Load Speed: 11,000/min.Input Power: 705 Watt.Output Power: 400 Watt.Revolutions at rated load: 7,000 /min.Spindle thread: M14.Weight (without power cable): 1,5 kg.Supplied with : Flange nut, handle & flat-pin spanner 240 volt

Eagle PAB6000 Series 100V Line Slave Amplifiers (Power RMS (W) 240), at Maplin
Eagle PAB6000 Series 100V Line Slave Amplifiers (Power RMS (W) 240)•Sensitivity selector switchEagle PAB6000 Series 100V Line Slave Amplifiers (Power RMS (W) 240)When you need additional power amplification to power more speakers in a system this great quality Booster Amplifier is compatible with all amplifiers in the Eagle Public Address range and any other pieces of equipment with a line level output. Fan assisted cooling maximises reliability and a switchable input sensitivity to enable correct interface with different equipment

Vax Steam Stick - White, at Maplin
•1500W•Cleans hard floors and refreshes carpets•Heating time: less than 1 minute•Steaming time: 10 minutes/tank•Tank capacity: 0.28 Litre•6m Power cord•Weight: 2.1kg•Dimensions: 20 x 28 x 110cm•Tools: Measuring jug (with hard water filter)• 2 x Microfibre cleaning pads / Carpet glider

GIGABYTE H61M-S2PV Socket 1155 Motherboard, at Maplin
•Support for Intel® Core™ i7, i5, i3 processors together with Celeron and Pentium LGA 1155•DDR3 1333 / 1066 / 800 Memory Support•USB2 +PCIe GEN3•INTEL H61 Chipset•Onboard Graphics and HD Sound + Gb LAN•Ready for INTEL 1155 CPU’s•SATA 3Gb/s + DVI OutputPower Failure Protection.Permanent damage from power surge or failure during BIOS update, can be avoided with GIGABYTE DaulBIOS, which automatically enables a secondary, back up BIOS. GIGABYTE also uses Anti-Surge ICs to protect the motherboard against power surges.50,000 Hours All Solid Capacitors.GIGABYTE Ultra Durable motherboards are equipped with all solid capacitors. With an average lifespan of 50,000 hours, these solid capacitors provide the stability, reliability and longevity essential to meet the power needs of high-end processors and other components running today's most demanding applications and games.On/Off Charge TechnologyGIGABYTE On/Off Charge technology allows you to charge your iPhone, iPad and iPod Touch regardless of whether your PC is on, in standby mode or even off. A derivative of GIGABYTE's highly acclaimed 3x USB Power feature, On/Off Charge enables devices to draw more current from GIGABYTE motherboard USB ports than standard USB ports allow, so that charging from your PC can be as fast as with a charger.

Mitex Professional PMR446 Radio(Used), at Maplin
•Professional radio quality on the PMR446 band•Manufactured using robust plastic materials, ideal for security roles•Supplied with drop in charger, lithium-ion battery 1300mAH•0.5W License free•Pre-programmed with 15 memories using combinations of DCS and CTCSS privacy tones•Channel scan functionThe Mitex 446 is a professional grade PMR446 license free radio that uses high quality components used in the professional range. As with all our other handportables, the Mitex 446 is ready to use straight from the box and designed to be user friendly and market compatible. The Mitex 446 will communicate with Icom, Kenwood and Motorola PMR446 handportables and for those of you that want additional privacy.Channels 1-3: MotorolaChannels 4-6: KenwoodChannels 7-9: IcomThe channels on the Mitex 446 radios reciprocate the channel numbers on the other manufacturers radios so Channel 1 on the Mitex 446 will talk to Channel 1 on the Motorola PMR446 radio. Channels 10-15 are programmed with Mitex frequencies which include obscure tones for added privacy; channel 16 is a scan channel.

Replacement lamp for PHILIPS-LC 4242-40, at Maplin
•Complete projector lamp for the PHILIPS-LC 4242-40• Compatible with project manufacturer part code(S)-LCA3109• Expected lamp life of 2000 Hours• 150W Lamp Wattage If possible please follow the user manual for your projector model. & nbsp; How to take the lamp out of the projector : & nbsp; 1. Turn the projector off by pressing the Power button 2. Allow the projector to cool down for 30 - 45 minutes 3. Disconnect the projector from the power cable 4. Unscrew the screws on the lamp compartment cover, lift and remove 5. Unscrew the screws on the lamp module 6. Lift up the handle on the lamp and pull the lamp out slowly and carefully & nbsp; How to replace the bulb on the lamp & nbsp; Always use the appropriate tools to uninstall and install the bulb. In most cases you will only require standard screwdriver. & nbsp; Once the old lamp has been removed the new lamp can be installed ; & nbsp; 1. Place the new lamp into the open lamp compartment of the projector 2. Ensure the lamp is in the same position and orientation as the old lamp before it was removed 3. Press the lamp into the projector firmly to ensure the lamp and power connector are seated securely 4. Tighten any fixing screws where present 5. Replace the lamp compartment cover and replace the fixing screws 6. Reset the lamp timer & nbsp; On some projector models there is a need to change a setting on the projector so the projector knows there is a new lamp installed. This is only the case on some models, please refer to your user manual. & nbsp; Important: & nbsp; Do not touch the glass area of the lamp with bare hands. & nbsp; Natural oil from your hands can seriously impact on the performance of the unit or cause the lamp to shatter when it reaches very high temperatures. & nbsp; Use a dry cloth to clean the lamp if it was accidentally touched.

Starrett B300-35 Blade for Combination Square 300mm (12in), at Maplin
Hardened steel, machine divided blades feature easy-to-read sharp graduations. Blade width x thickness approximately 25 x 2.4mm. Size 300mmGraduation: mm and 1/2 mm both sides

XLR 3-Pin Male D Series Chassis Connector Male 3 Threaded Holes L1, at Maplins
•Robust "D" metal shell •Standardized D sized 24 mm panel cutout •Solder cups on 3 - 7 pole version3 pole male receptacle, solder cups, Nickel housing, silver contacts, M3 mounting holes Universal D-size metal body XLR panel mount series. UL recognized component

Chunky Knit Ear Muffs, at Maplins
•Stylish Design•Comfortable and warm•Soft cups•Adjustable headband•Compatible with most devices•3.5mm jack•Frequency response: 40 Hz - 18 kHz•Sensitivity: 103 dBCombining stylish, warm earmuffs with headphones that can be connected to your iPod, smartphone or MP3 player through a 3.5 mm jack, the KitSound Audio Earmuffs bring fashion, practicality and music together.

GU10 6W 360lm 3000K LED Bulbs (twin pack), at Maplin
•Supplied as a twin pack•6W power consumption that gives you an equivalent 50W light output while saving you over 85% of electricity compared to a halogen bulb•360lm output•GU10 fitting, compatible with directional lighting equipment such as down lights, spot lights and desk lights•25,000 hours lifespan to save you even more electricity over the lifetime of the bulb•3000K warm white effect which is great for living rooms, bedrooms and hallways•38 degree beam angle to illuminate a small area to a bright intensity•Not compatible with a dimmerAre these bulbs suitable for what I need?These bulbs have a GU10 fitting which is compatible with directional lighting such as desk lamps and spotlights. The equivalent of a 50W halogen bulb, these bulbs give a bright output of 360lm while only using 6W of power. The reduced power will save you both electricity and money. The bulb is not compatible with a dimmer but gives you a 3000K warm white glow that gives soft lighting effects in living rooms, bedrooms and hallways.Why should I buy LED over halogen?If you’re bored of how often you have to replace light bulbs in your home, LED bulbs are the solution. Using the latest generation technology, they have an impressive lifespan of up to ten times longer than halogen bulbs. You’ll also use less power for the same level of lighting, saving you money off your electricity bill. LED bulbs are available in a wide variety of fittings, shapes and styles so that you will be able to find one to suit your needs.

Cube Pro Cartridge, PLA, Glowing Blue, at Maplins
The glowing blue CubePro PLA Filament Cartridge from 3D Systems is made to fit the CubePro Printer and contains enough filament to produce approximately 30 - 35 medium prints, which 3D Systems approximates to be the size of an average mobile phone case. CubePro cartridges are designed to snap into the CubePro for easy loading and switching. The smart cartridge can tell you how much material you have left, and it won't let you start a print if you don't have enough material to finish it. Moisture-lock construction protects your filament from water and environmental damage. PLA is a biodegradable plastic derived from corn, and does not give off harsh fumes when melted.Objects printed with CubePro PLA filament can even be dishwasher-safe if made thick enough.

Replacement lamp for INFOCUS-LP540, at Maplin
•Complete projector lamp for the INFOCUS-LP540• Compatible with project manufacturer part code(S)-SP-LAMP-017• Expected lamp life of 2000 Hours• 170W Lamp Wattage If possible please follow the user manual for your projector model. & nbsp; How to take the lamp out of the projector : & nbsp; 1. Turn the projector off by pressing the Power button 2. Allow the projector to cool down for 30 - 45 minutes 3. Disconnect the projector from the power cable 4. Unscrew the screws on the lamp compartment cover, lift and remove 5. Unscrew the screws on the lamp module 6. Lift up the handle on the lamp and pull the lamp out slowly and carefully & nbsp; How to replace the bulb on the lamp & nbsp; Always use the appropriate tools to uninstall and install the bulb. In most cases you will only require standard screwdriver. & nbsp; Once the old lamp has been removed the new lamp can be installed ; & nbsp; 1. Place the new lamp into the open lamp compartment of the projector 2. Ensure the lamp is in the same position and orientation as the old lamp before it was removed 3. Press the lamp into the projector firmly to ensure the lamp and power connector are seated securely 4. Tighten any fixing screws where present 5. Replace the lamp compartment cover and replace the fixing screws 6. Reset the lamp timer & nbsp; On some projector models there is a need to change a setting on the projector so the projector knows there is a new lamp installed. This is only the case on some models, please refer to your user manual. & nbsp; Important: & nbsp; Do not touch the glass area of the lamp with bare hands. & nbsp; Natural oil from your hands can seriously impact on the performance of the unit or cause the lamp to shatter when it reaches very high temperatures. & nbsp; Use a dry cloth to clean the lamp if it was accidentally touched.

Eagle 100V Line Attenuator (Peak Music Power (W) 24), at Maplins
Eagle 100V Line Attenuator (Peak Music Power (W) 24)Eagle 100V Line Attenuator (Peak Music Power (W) 24)Attractively styled rotary switch designed to attenuate the signal fed to loudspeakers driven by the 100 V line output of a public address amplifier. Fits standard flush back box.

Verbatim 6.5W 400 Lumen LED GU10, at Maplins
•400 Lumen output •Equivalent to 57W incandescent bulb•GU10 fitting•220-240V AC Voltage•Warm white illumination: 3000K•35° beam angle•25,000 hours Lifetime•Efficacy: 65 lm/w•85% Energy Saving

GW Instek GPS-4303S Multi-Output Linear DC Power Supply, at Maplins
• 2, 3 independent isolated output•Four 3 digit LED displays•0.01% load and line regulation •Low ripple and noise•Tracking operation and auto series/parallel operation •Output on/off switch•Output voltage and current setting when output disable (Except for GPS-2303)•Fan speed control circuit to minimize fan noise •Over load and reverse polarity protection•Optional European jack type terminalThe GPS Series linear power supplies have 2-4 independent output channels, 180W to 200W output, overload and reverse polarity protection as well as an output ON/OFF switch for safety. The tracking mode switches allow voltage/current to be output in parallel or series and the intelligent fan reduces noise. The GPS-Series is entry level general purpose power supplies recognized for their afford ability in education, laboratories and industry.

Intel Core i5-3550 Ivy Bridge H2 Quad Core 3.3GHz Processor, at Maplin
•Number of Cores - 4•Number of Threads - 4•Clock Speed - 3.3 GHz•Max Turbo Frequency - 3.7 GHz•Cache - 6 MB Smart Cache•Bus/Core Ratio - 33•Instruction Set - 64-bit•Lithography - 22 nm•Socket - 1155•Max TDP - 77 W•Graphics Model - Intel HD Graphics 2500•Graphics Base Frequency - 650MHz•Graphics Max Dynamic Frequency - 1.15GHz

NJD Digital RGB Tape Light Reel 5m, at Maplins
NJD Digital RGB Tape Light Reel 5m•MCD/Lumen/M 86000-96000 mcd•30 Ultra Bright LEDs per metre•IP Grade - IP65•9 W per metre•1334 mA per metreNJD Digital RGB Tape Light Reel 5mSuper-bright IP65 rated Digital RGB flexible ribbon LED tape with 30 x 5050 LEDs per meter on a white PCB. The tape is extremely thin with an epoxy resin coating to protect the tape. With a depth of just 4 mm and only 14.5 mm wide it will fit into many unusual places. Supplied on 5 m reel with a 3M self adhesive back, this tape is easily applied to most smooth surfaces by simply removing the backing paper. The LEDs produce a wide 120 degree glow which gives a reflected glow similar to that of neon. The tape can be cut or joined, with cutting points at at 3 LED (100 mm) intervals. The tape is highly flexible and has a low power consumption making it ideal for many uses such as homes, vehicles, shops, bars and nightclubs.

Einhell TH-SM2131 Double Bevel Crosscut Mitre Saw & Laser 210mm 1500 Watt 240 Vo, at Maplins
The Einhell TH-SM 2131 Dual is a Double Bevel Cross Cut Mitre saw for cutting wood, laminated panels and plastic. The saw head can be tilted to the left or right making it highly flexibile in setting mitres on two sides in just one action. An integrated laser marks the cutting line, enabling the workpiece to be positioned quickly and exactly. The high-quality work table is made from die-cast aluminium and comes with an exact angle adjustment facility which can be latched single handedly in various positions. The double tube-mounted sliding function enables you to cut particularly wide workpieces. The workpiece is supported on two sides, and a clamping device enables reliable securing of the workpiece. A workpiece stop with rails adjustable to the left and right enables safe and exact operation. Specification Input Power: 1,500 Watt.No Load Speed: 5,000/min.Capacity: 90°/90°: 310 x 62mm, 90°/45°: 210 x 62mm, 45°/90°: 310 x 36mm, 45°/45°: 210 x 36mm.Blade: 210 x 30mm bore x 48 tooth.Mitre cut: -45 ° - +45 °.Weight: 10.5 kg.

Hammond Project Box Light Grey 125x100x90mm, at Maplin
•Low cost project box enclosure designed to meet IP54•Ideally suited for housing PC boards•Flanged lid allows for wall mount applications•Moulded in light grey ABS plasticThis project box is ideally suited to house PC boards. It is moulded from a light grey ABS plastic with a light texture. The material carries a UL flammability rating of UL94HB. The box has a two-part construction, with both halves including a smooth recessed area for membrane, label or silkscreen. PC board standoffs are moulded into both halves of the enclosure. The flanged lid allows for the enclosure to be wall mounted.

BenQ GL2250HM 21.5 inch Monitor(Used), at Maplin
•Screen Size:21.5"•Resolution:1920 x 1080•Brightness:250 cd/m2•Native Contrast:3000:1•Response Time:6 ms (GtG)•Input Connector:D-sub/DVI/HDMI/headphone jack/line inEnjoyment for Your Everyday Home and Work LifeBuilt to bring you the ultimate personal visual entertainment, the BenQ GL2250HM is certainly one of a kind! Featuring the speakers, ultra-high 3000:1 native contrast, 20M:1 dynamic contrast ratio, and true 8-bit panel performance with deep blacks and minimized light leakage, this VA LED monitor refreshes your view with truly fantastic colours and details. And, its HDMI connectivity leads the path to a whole new level of multimedia enjoyment.Brilliant Image QualityVA LED Leads the WayAfter launching the world's first VA LED monitor, BenQ - the world's leading LED monitor brand - is now taking the lead to introduce VA LED to our home & office offering: GW Series! Built with the dream combination of LED with VA panel, GW Series is bound to bring a whole new visual experience and enjoyment to you with truly authentic colours, deeper blacks, higher contrast and sharper details.An integral part of your home and workplace décorGL50 Series blends perfectly with any décor, adding a hint of low-key elegance to your living space with its high-gloss frame and base stand streamlined by a curvaceous neck that creates stunning visual fluidity. Beautiful from any angle, the back of the GL2250HM is carbon fiber patterned to recreate the powerful drive of a racing car and energize their whole appearance. Incorporating a 16 mm slim bezel display, GL50 Series creates a sophisticated look while keeping things nice and compact. You'll find multi-panel configuration for home entertainment or office viewing use much simpler with less distraction from the monitor frame.Flicker-free Backlight for Visual Pleasure The GL2250HM is upgraded to eliminate flickering at all brightness levels. Test Your Computer Monitor for Flickering:Reading Mode for an Optimized Reading ExperienceFor a more comfortable reading experience, BenQ has adjusted the monitor's colour temperature, brightness, contrast ratio and sharpness to create the all new Reading Mode which simulates the look of printed paper to help reduce the eye discomfort typically caused by prolonged and focused use of eyes on computer monitors.Improved Eco Mode for Higher Energy EfficiencyThe improved Eco Mode adjusts the backlight brightness level to ensure the highest display quality is presented to you with the highest energy efficiency. This intelligent mode reduces at least 37% of the power consumed by document viewing, Internet browsing and emailing and up to 44% of the power consumed by gaming.3000:1 Ultra High Native Contrast Ratio and 20M:1 Dynamic Contrast Ratio for Depth and DefinitionThe GL2250HM comes with an ultra-high native contrast ratio of 3000:1 and dynamic contrast ratio of 20M:1 to add colour depth and definition to darkened and complex motion pictures, so that everything you see, from the brightest white to the darkest black, is perfectly rendered to deliver the clearest, smoothest picture performance during movies and video games.Perfecting Your Audiovisual Enjoyment with SpeakersWhether you're listening to music or watching your favorite film, simply turn on the speakers to experience the audiovisual fun!HDMI Multimedia InterfaceThe latest HDMI high-speed multimedia interface* makes these monitors incredibly convenient to use – now you can enjoy digital entertainment effortlessly even with additional multimedia equipment in the future.Full HD 1080p 16:9 Visual PerfectionThe BenQ GW2265HM supports the Full HD 1080p with 16:9 aspect ratio - allowing the subtlest details to stand out with richer, more realistic colours, making your viewing experience even more absorbing.Superior Response TimeEnjoy high dynamic videos without ghosting or other artifacts with 6 ms GTG response time.Senseye® 3 Visual Solution to Your Everyday Viewing NeedsExperience the truest colours of the world with the BenQ Senseye® Human Vision Technology. With the help of its six proprietary calibration techniques, Senseye® 3 delivers only the best viewing quality in each of its six pre-set viewing modes –Standard, Movie, Game, Photo, sRGB, Reading, and Eco – with the Eco Mode especially designed to save power and money.ecoFACTS LabelecoFACTS can tell you how eco-friendly BenQ products are!Development of eco-friendly products, BenQ doesn't just want to comply with green regulations passively, but also to actively develop eco-friendly products!ecoFACTS declares BenQ's greatest efforts on the replacement of hazardous substances, material selection, packaging design, energy-saving design and other aspects of the products.

Luceco LED B15 Candle 3.5W 250lm Bulb, at Maplin
•3.5W power consumption by this LED bulb gives you an equivalent 25W light output, saving you more than 85% in electricity compared to a standard bulb•250lm output•B15 light fitting used in ceiling lights and table lamps•25,000 hours lifespan to save you even more money over the lifetime of the bulb compared to halogen bulbs•2700K warm white effect which is great for living rooms, dining rooms and bedrooms•160 degree beam angle to illuminate the entire room•Three year warranty included for peace of mind (proof of purchase required)•Not compatible with dimmersIs the bulb suitable for what I need?The bulb has an B15 fitting which is compatible with a range of ceiling and table lights. The equivalent to a 25W halogen bulb, this bulb gives a bright output of 250lm while only using 3.5W of power. The reduced power will save you both electricity and money. This bulb is not compatible with a dimmer but gives you a 2700K warm white glow that is ideal for giving soft lighting effects in living rooms, dining rooms and bedrooms.Why should I buy LED over halogen?If you’re bored of how often you have to replace light bulbs in your home, LED bulbs are the solution. Using the latest generation technology they have an impressive lifespan of up to ten times longer than a halogen bulb. You’ll also use less power for the same level of lighting saving you money off your electricity bill. LED bulbs are also available in a wide variety of fittings, shapes and styles so that you will be able to find an LED bulb to suit your needs.

Aventador Ride-on Spare Gasket, at Maplins
•Gasket for Aventador Ride-on (Maplin Code: N88QT)

Maplin UK check their prices daily against other retailers making sure they have consistently low prices. Maplin has more to offer than any other online retailer, with their excellent customer service, the Maplin low price guarantee of Everyday Low Prices, 24 Hr Helpline, delivery 7 days a week and expert installation, all backed by a nation-wide network of over 400 stores. Shopping online at Maplin UK, customers can be sure they are getting the best price!

Maplin Electrical website offers UK customers a vast range of Electrical products online including a constantly updated range of Web exclusives. From Washing Machines, Widescreen TV's to the Latest in Home Computing, Maplin caters for everyone!